FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » locating OEM butt gears

    • 1 of 1

       

    12/23/2019 6:44 PM  #1

    Cab4word67
    Senior 24-7 FYI Addict

    Offline

    From: Portland, Ore
    Registered: 4/06/2019
    Posts: 1,155

    locating OEM butt gears

    Does anyone have a lead on a set of OEM  8" 2.73s or 2.80s. Just wondering 

    Chris

    Slammed Big Blue, ran over the varmints that messed with the Stang. Now all is good in the NW
     

    12/24/2019 9:24 AM  #2

    TKOPerformance
    Hyper FYIFORD ADDICT

    Offline

    From: Newark, DE
    Registered: 12/15/2014
    Posts: 7,514

    Re: locating OEM butt gears

    Go to the Cherry Island landfill, dig down about fifteen years and there's a set I tossed...

    Think I have a set out of the 8.8 in my '89 GT I haven't recycled yet.  Not that they would do you any good.  Of course, as soon as I send them to China to return as brake rotors someone will need them...

     

    12/24/2019 9:34 PM  #3

    Nos681
    Senior 24-7 FYI Addict

    Offline

    From: Atlantic Mine, Michigan
    Registered: 7/14/2016
    Posts: 3,338

    Re: locating OEM butt gears

    I believe I still have 2.80 from my 8”.  I’ll check for ya.

     

    12/24/2019 9:46 PM  #4

    Nos681
    Senior 24-7 FYI Addict

    Offline

    From: Atlantic Mine, Michigan
    Registered: 7/14/2016
    Posts: 3,338

    Re: locating OEM butt gears

    I still have it if you want to pay for shipping. 42teeth/15teeth=2.80

     

    12/25/2019 12:47 AM  #5

    50vert
    Senior 24-7 FYI Addict

    Offline

    From: QLD Australia
    Registered: 4/01/2013
    Posts: 1,427

    Re: locating OEM butt gears

    I have a centre also, free ... But Dan's is gunna be cheaper.

    Last edited by 50vert (12/25/2019 12:48 AM)

    "Those telephone poles were like a picket fence"
     

    12/25/2019 12:56 PM  #6

    Nos681
    Senior 24-7 FYI Addict

    Offline

    From: Atlantic Mine, Michigan
    Registered: 7/14/2016
    Posts: 3,338

    Re: locating OEM butt gears

    I just have the gears, no pumpkin

     

    12/25/2019 9:42 PM  #7

    Cab4word67
    Senior 24-7 FYI Addict

    Offline

    From: Portland, Ore
    Registered: 4/06/2019
    Posts: 1,155

    Re: locating OEM butt gears

    Thank you all. I will reach out to the shop Thursday and see if we still need. To all of you do we know the condition of any of these?

    Slammed Big Blue, ran over the varmints that messed with the Stang. Now all is good in the NW
       •Thread Starter
     

    12/25/2019 10:58 PM  #8

    50vert
    Senior 24-7 FYI Addict

    Offline

    From: QLD Australia
    Registered: 4/01/2013
    Posts: 1,427

    Re: locating OEM butt gears

    Mine is in Australia, so no real help to you. Sorry. I'm sure Dan will chime in though.

    "Those telephone poles were like a picket fence"
     

    12/26/2019 2:14 PM  #9

    wsinsle
    Senior 24-7 FYI Addict

    Offline

    From: Belle Vernon, PA
    Registered: 4/01/2013
    Posts: 1,704

    Re: locating OEM butt gears

    I have a whole rear end assembly I took off of my 66. I built a 9" from a 8" rear with direction from Daze's website. Didn't want to use the original,in case I screwed it up I can go back. You can have as much or as little as you would like for shipping.

    If this forum can't fix it, it isn't broke.
     

    12/26/2019 8:30 PM  #10

    Nos681
    Senior 24-7 FYI Addict

    Offline

    From: Atlantic Mine, Michigan
    Registered: 7/14/2016
    Posts: 3,338

    Re: locating OEM butt gears

    The 2.80 gears are in great shape. Stored in garage.  I was still driving with them before gear ratio change. That was reason for removal. Gears were behind street driven 289/c4 entire life.

    Last edited by Nos681 (12/26/2019 8:35 PM)

     

    1/04/2020 9:56 PM  #11

    Nos681
    Senior 24-7 FYI Addict

    Offline

    From: Atlantic Mine, Michigan
    Registered: 7/14/2016
    Posts: 3,338

    Re: locating OEM butt gears

    Chris,

    Do you still need gears?

    Dan

     

    1/05/2020 6:56 AM  #12

    TKOPerformance
    Hyper FYIFORD ADDICT

    Offline

    From: Newark, DE
    Registered: 12/15/2014
    Posts: 7,514

    Re: locating OEM butt gears

    Nope.

     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  locating OEM butt gears

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.