FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

9/02/2013 6:38 PM  #1


67 in primer

 

9/02/2013 8:35 PM  #2


Re: 67 in primer

Progress!


Money you enjoy wasting is NOT wasted money... unless your wife finds out.
 

9/03/2013 6:01 AM  #3


Re: 67 in primer

Steve, Is the round black thing hanging on the wall your air /water seperator??  if so tell us a little about it. brand???  

Car looks good, getting closer to paint every day!!

 

9/03/2013 7:29 AM  #4


Re: 67 in primer

Thanks for the inspiration! Wish I was back home in Sweden, had time to work in the garage and that the "Phoenix Project" looked like that!

 

9/03/2013 5:26 PM  #5


Re: 67 in primer

glad to see your progress....wish I could say the same..bad ign. switch,...no time even with long weekend....I am however getting the garage straightened around alittle in case any of the forum members stop in while in the Athens Tn. area for their ride on the tail of the dragon....good luck with your car!!

 

9/03/2013 6:28 PM  #6


Re: 67 in primer

The air dryer is a Devilbiss CT30 Desiccant dry air system.I am very pleased with it.Been useing it for about 9 years It only now needs the desiccant changed.

     Thread Starter
 

Board footera


REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.