FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

4/04/2020 9:04 AM  #1


2016 caliper-parking brakes

97-02 Escort parking brake cables for drum brakes.
Some minor modifications required at caliper end (tack weld a washer).
Factory cable route used.
Custom front cable by Mustang Dan. 🤣

This setup could be used with a floor mounted hand brake as well.
97-02 Escort front cable will attach without modifications.
Front cable length could be modified to floor brake placement easily.

The loop is larger than needed at caliper.
Could place filler weld in rear 1/2 of loop.
I may do this later if needed.
The zip tie keeps loop from detachment during assembly and JIC.
Will use safety wire or stainless ties (like for header wrap) for long term.

2016 calipers with new rotors has about 1/4” travel to set brakes.

I included the 97-02 Escort front cable for floor mount applications.
Cable stop crimper borrowed from work was purchased at Tractor Supply.
Front cable, stops, and e-clips purchased at local hardware store...look for Hillman parts boxes.


https://i.ibb.co/HHRGygs/D1-A79061-F695-4019-9960-020520-D7025-B.jpg


https://i.ibb.co/FKHbzLZ/E2173440-B4-AE-46-B4-B61-D-E765-F9-F453-A2.jpg


https://i.ibb.co/rfqtZSw/8-D74-C7-FA-C199-45-D7-9-F0-F-DBFC0028-D437.jpg


https://i.ibb.co/M2Gm19F/75-EDA92-B-D097-4-A29-8-A21-B309-DBDAD9-A7.jpg


https://i.ibb.co/Nm9BBQ5/E74-CC1-DD-5-C6-A-41-C4-AAD8-F106-A21-DB0-DC.jpg


https://i.ibb.co/wBvJnFC/E5586543-F028-45-B3-9-ED4-CB29-EFC44-B76.jpg


https://i.ibb.co/tKqF0TK/F8-FC2445-BAF2-42-E3-9758-8-FE47-F32-BEE5.jpg

https://i.ibb.co/CQW13KL/20-B336-C9-E322-48-D5-999-F-602621-A153-BB.jpg

https://i.ibb.co/nwR0G2q/C156-D6-F4-C828-428-F-AC82-8-A7-D3323-FB16.jpg

 

Last edited by Nos681 (4/15/2020 6:43 AM)


65 coupe, 5.0L, T5, 3.25 Currie traction lock, strong arming for now
 

4/15/2020 6:38 AM  #2


Re: 2016 caliper-parking brakes

Additional options for brake cables found.

https://i.ibb.co/yd55Frs/64-EF7-C40-9-FB5-46-D8-9-B45-E834-E0-D855-E5.jpg

https://i.ibb.co/NrQ8xP7/8-F5-D9-BB4-5694-45-A7-86-AA-530092616181.jpg

https://i.ibb.co/SmdRnGg/83856940-AE44-43-BF-A548-D7-E561-B58863.jpg

https://i.ibb.co/9NPxH7N/59-E2-A990-8467-43-D9-8641-F2071-DA1-F796.jpg

https://i.ibb.co/jr6RQWM/0-D4910-C4-2-F02-404-A-8-E93-CAEC139-EAA59.jpg

https://i.ibb.co/dQKTP6J/CDAC6290-9-F5-D-4-B03-9-C42-90-FF79-E041-D8.jpg


65 coupe, 5.0L, T5, 3.25 Currie traction lock, strong arming for now
     Thread Starter
 

Board footera


REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.