FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » Swap Meet
  •  » The Coupe is Down!!!!

    • 1 of 1

       

    12/02/2019 4:20 AM  #1

    Coupedaddy
    I FYI 24-7

    Offline

    From: Katy TX
    Registered: 4/18/2013
    Posts: 317

    The Coupe is Down!!!!

    The Coupe is down engine is out lots of parts for sale to put it back together for Myrtle Beach Lol. Be on the lookout on the swap meet page for parts new painless wiring harness for 5.0 fuel injection system powder coated Gt 40 lower Intake and upper plenum, valve covers, accel pedal bracket, 19 lbs injectors fuel rails factory 5.0 distributor A9L ecu , Throttle body MAF and MSD tach adapter SCT super chip  Msd digital 6 plus (new) MSD carb distributor with steel gear 1965 GT steering box Vic Jr Carbed intake Holley 750 vac secondary aluminum finish manual choke MSD 6AL box Pray all is well !!!!!

    Last edited by Coupedaddy (12/02/2019 8:06 AM)

     

    12/03/2019 8:15 PM  #2

    Steve-G
    I FYI 24-7

    Offline

    From: Glen Rose,TX
    Registered: 4/01/2013
    Posts: 544

    Re: The Coupe is Down!!!!

    Get her done Coupedaddy.

     

    1/18/2020 4:02 PM  #3

    Coupedaddy
    I FYI 24-7

    Offline

    From: Katy TX
    Registered: 4/18/2013
    Posts: 317

    Re: The Coupe is Down!!!!

    The Coupe is back up
    Kelsey Hayes 65 mustang caliper's brackets,shields used 150.00
    MSD 289/302 steel gear distributor new in box part # 8598 200.00
    MSD digital 6 plus 150.00 used
    MSD 6 AL 50.00 used
    Holley 750 vac secondary Man choke carb aluminum body 2 yrs old ran perfect when pulled 200.00
    Victor Jr single plane intake 150.00
    Powder coated GT 40 Upper Lower Intake Valve Covers Throttle Cable bracket 400.00
    Cold Fusion Nitrous bottle Hi flow valve 100. 00 Looks new
    65 Mustang fuel tank with 2 A&N fittings welded on both sides with tubes going to the rear of the tank 16 gallon 100.00 was modified if you wanted to run  extra  pumps for nitrous or fuel injection supply and return
    Pray all the s well

    [url=https://ibb.co/d0GSLmh][/url

    Last edited by Coupedaddy (1/19/2020 10:32 PM)

       •Thread Starter
     

    5/07/2020 6:01 AM  #4

    Coupedaddy
    I FYI 24-7

    Offline

    From: Katy TX
    Registered: 4/18/2013
    Posts: 317

    Re: The Coupe is Down!!!!

    Intake Upper and lower valve covers throttle bracket GT 40 heads are sold !!!

       •Thread Starter
     

     

    1 of 1

  • Index
  •  » Swap Meet
  •  »  The Coupe is Down!!!!

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.