| ||
Visit MustangSteve's web site to view some of my work and find details for: FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events |
Offline
Selling a complete set of power seat tracks and air bags that came off of a 2012 GT mustang. The car only had 34 miles on it and the shop removed these seats to install different seats. Seat tracks are complete with wiring harness and all the switches needed. I also have the seat air bags that go installed the front upper cushion of the seat. Air bags have never been detonated.These are great if you do not have a car with power seats and front seat air bags.
$200.00 for complete tracks
$50.00 for both air bags
open to offers as well.
Interested in power seat tracks for 2013. will the 2012 fit?
Offline
Yes these fit 2012 seats.You will have to remove the manual tracks off of yours.They are held by 4 bolts.Easiest way I found out how to take them off is to remove the bottom seat cushion.
let me know if you still want them!
thanks-
ramses@mustangsteve.com
Yes I am interested. I only need the passanger side. Are you willing to split them up? Perhaps you could quote your price for the Passanger side only or perhaps negotiate for both. Since I only need one, the freight for both may too costly. I'm in California.
Following your response to the above,I would like to discuss the mechanics of changing it, any possible wire connectors and the shipping weight.
This is only my second post, so I can't send you a private message. Perhaps you could respond with a private message so we could exchang e-mail and you could furnish a picture etc.
Thanks, Joe
Offline
Joe-1926 wrote:
Yes I am interested. I only need the passanger side. Are you willing to split them up? Perhaps you could quote your price for the Passanger side only or perhaps negotiate for both. Since I only need one, the freight for both may too costly. I'm in California.
Following your response to the above,I would like to discuss the mechanics of changing it, any possible wire connectors and the shipping weight.
This is only my second post, so I can't send you a private message. Perhaps you could respond with a private message so we could exchang e-mail and you could furnish a picture etc.
Thanks, Joe
Send me an email:
ramses@mustangsteve.com
REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on. |