| ||
Visit MustangSteve's web site to view some of my work and find details for: FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events |
Offline
Can we all shout.............."Hallie-Lou-Your!"
6s6
Offline
Coupedaddy wrote:
Praying all is well with everyone! Damage to the Coupe wiring harness,drivers seat which is hard to find 4 rims front bent from Michigan trip in Indianapolis from pot holes and the accident back wheels are cracked leaked all the air out rear tires slight pass fender bent at the bottom & front suspension the good news is I am ok and the fusible links did its job I was able to put a hot wire on the coil so the computer for the fuel injection didn’t fry it was good to hear the engine may only be the headlamp harness that I need that damage came from the hook grounded out the harness when pulling it out the ditch. Oh And I need a new pair of “Draws” I am thinking tag less and fire 🔥 proof and stronger elastic tight around the thigh leak proof lol when I start driving it again
Had a feeling & hoping, after Steve/Glen Buzek & I chatted with you over a week ago, you wouldn't total your ride. Maybe I'll see yuh this Saturday.
BTW...we know what size Bronx pizza yuh like but getting them "drawers" is totally up to you
Offline
Take the seat apart and inspect it. These are a simple construction so you can probably rebuild/weld the frame if you don't find a replacement.
REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on. |