FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » PUTTIN IN A LIFT

    • 1 2 3 4 5  Jump to

       

    8/10/2020 8:10 AM  #51

    bearcat
    I FYI 24-7

    Offline

    From: Twin falls, Idaho
    Registered: 4/01/2013
    Posts: 337

    Re: PUTTIN IN A LIFT

    I'm still on the fence to go with a 2 or 4 post. both have their advantages. my biggest dilemma is not just my mustang but also my truck, F250. of course in not in a position to pull the trigger on one yet 

    65 coupe, 351w, c4, power disk brakes, power r&p, vintage air.
     

    8/10/2020 7:43 PM  #52

    6sally6
    Hyper FYIFORD ADDICT

    Offline

    From: Surfside Beach,SC
    Registered: 4/02/2013
    Posts: 6,855

    Re: PUTTIN IN A LIFT

    bearcat wrote:

    I'm still on the fence to go with a 2 or 4 post. both have their advantages. my biggest dilemma is not just my mustang but also my truck, F250. of course in not in a position to pull the trigger on one yet 

     


    https://www.youtube.com/watch?v=y3Y-JTI3gzs

    Yeah.................me too!
    6s6

    Get busy Liv'in or get busy Die'n....Host of the 2020 Bash at the Beach/The only Bash that got cancelled  )8
     

    8/10/2020 7:49 PM  #53

    Rudi
    Senior 24-7 FYI Addict

    Offline

    From: Stuck in the 50's Welland Ca
    Registered: 4/01/2013
    Posts: 3,976

    Re: PUTTIN IN A LIFT

    Ya hasta has both for the best of both worlds.

    Good work ain't cheap, Cheap work ain't good!   Simple Man
     

    8/11/2020 8:03 AM  #54

    bearcat
    I FYI 24-7

    Offline

    From: Twin falls, Idaho
    Registered: 4/01/2013
    Posts: 337

    Re: PUTTIN IN A LIFT

    Oh ya sell that one to my wife lol she is the BIG lol I'm just happy that I am getting a shop here in the near future. As soon as the house in Yuma sells I can start on the shop project. So stay tooned

    65 coupe, 351w, c4, power disk brakes, power r&p, vintage air.
     

    8/11/2020 6:38 PM  #55

    Cab4word67
    Senior 24-7 FYI Addict

    Offline

    From: Portland, Ore
    Registered: 4/06/2019
    Posts: 1,154

    Re: PUTTIN IN A LIFT

    Big news today, Gas line moved up and out of the way and electrical will be moved tomarrow. I am picking up the lift on monday 
    New pictures soon

    Slammed Big Blue, ran over the varmints that messed with the Stang. Now all is good in the NW
       •Thread Starter
     

    8/11/2020 7:09 PM  #56

    BillyC
    I FYI 24-7

    Offline

    From: Chesapeake, Va.
    Registered: 4/02/2013
    Posts: 966

    Re: PUTTIN IN A LIFT

    6sally6 wrote:

    bearcat wrote:

    I'm still on the fence to go with a 2 or 4 post. both have their advantages. my biggest dilemma is not just my mustang but also my truck, F250. of course in not in a position to pull the trigger on one yet 

     


    https://www.youtube.com/watch?v=y3Y-JTI3gzs

    Yeah.................me too!
    6s6

    I watched the video. I think I’ll stick to my trusty old floor jack and jack stands. Not from Harbor Freight.

    "anyone that stops learning is old, whether at twenty or eighty"Henry Ford
     

    8/12/2020 5:24 AM  #57

    TKOPerformance
    Hyper FYIFORD ADDICT

    Offline

    From: Newark, DE
    Registered: 12/15/2014
    Posts: 7,502

    Re: PUTTIN IN A LIFT

    bearcat wrote:

    I'm still on the fence to go with a 2 or 4 post. both have their advantages. my biggest dilemma is not just my mustang but also my truck, F250. of course in not in a position to pull the trigger on one yet 

    Depending on the year of that F250 the 4 post may be a better option.  The way the frame kicks up in the rear and the location for the front lift arm due to the way the suspension is on mine make picking it up with a 2 post tricky.  Definitely get one of those screw jack stands to help it balance.  It really has to be perfectly positioned on the lift within a couple inches or it starts to nose forward as you lift it.
     

    Last edited by TKOPerformance (8/12/2020 3:09 PM)

     

    8/12/2020 8:55 AM  #58

    bearcat
    I FYI 24-7

    Offline

    From: Twin falls, Idaho
    Registered: 4/01/2013
    Posts: 337

    Re: PUTTIN IN A LIFT

    Thanks for the info TKO, I'm thinking a 4 post may be the better option for me. ensuring that it is big enough for my f250.  

    65 coupe, 351w, c4, power disk brakes, power r&p, vintage air.
     

    8/12/2020 9:39 AM  #59

    DC
    Senior 24-7 FYI Addict

    Offline

    From: Marshall, MI
    Registered: 4/01/2013
    Posts: 1,251

    Re: PUTTIN IN A LIFT

    I have both a four post and a two post and if I was only going to have one it would be a four post. Much more versatile and safe. We had a small earthquake around here a few years ago and the car on the two post came down, the pour post just wiggled a little. Luckily I had my hydraulic lift table under the car with some tools on it and that was the corner that dropped first. table caught the car before major damage.

     

    8/12/2020 3:11 PM  #60

    TKOPerformance
    Hyper FYIFORD ADDICT

    Offline

    From: Newark, DE
    Registered: 12/15/2014
    Posts: 7,502

    Re: PUTTIN IN A LIFT

    I'll have both too if I can stop working long enough to set the 4 post up, that and stop cutting up @#$%ing trees that fall.  Firewood anyone?

     

    8/15/2020 4:21 PM  #61

    Cab4word67
    Senior 24-7 FYI Addict

    Offline

    From: Portland, Ore
    Registered: 4/06/2019
    Posts: 1,154

    Re: PUTTIN IN A LIFT

    Well here is another update on my newly remodeled garage. We now have a insulated ceiling to hang things on. Still waiting on the garage door hi lift kit, FEDX lost it between two cities both within 10 miles of my house. 

    Slammed Big Blue, ran over the varmints that messed with the Stang. Now all is good in the NW
       •Thread Starter
     

    8/15/2020 5:21 PM  #62

    6sally6
    Hyper FYIFORD ADDICT

    Offline

    From: Surfside Beach,SC
    Registered: 4/02/2013
    Posts: 6,855

    Re: PUTTIN IN A LIFT

    I LIKE how that turned-out!
    6sally6

    Get busy Liv'in or get busy Die'n....Host of the 2020 Bash at the Beach/The only Bash that got cancelled  )8
     

    8/15/2020 8:30 PM  #63

    Cab4word67
    Senior 24-7 FYI Addict

    Offline

    From: Portland, Ore
    Registered: 4/06/2019
    Posts: 1,154

    Re: PUTTIN IN A LIFT

    yea getting close to done. need to frame and drywall the ends now. you can see how much lift I have now. Close close close

    Last edited by Cab4word67 (8/15/2020 8:31 PM)

    Slammed Big Blue, ran over the varmints that messed with the Stang. Now all is good in the NW
       •Thread Starter
     

    8/15/2020 8:37 PM  #64

    bearcat
    I FYI 24-7

    Offline

    From: Twin falls, Idaho
    Registered: 4/01/2013
    Posts: 337

    Re: PUTTIN IN A LIFT

    Looking good cab, keep up the good work

    65 coupe, 351w, c4, power disk brakes, power r&p, vintage air.
     

    8/16/2020 4:35 PM  #65

    Cab4word67
    Senior 24-7 FYI Addict

    Offline

    From: Portland, Ore
    Registered: 4/06/2019
    Posts: 1,154

    Re: PUTTIN IN A LIFT

    One more wall today, maybe I can finish the walls by wednesday. little tape and mud

    Last edited by Cab4word67 (8/16/2020 4:36 PM)

    Slammed Big Blue, ran over the varmints that messed with the Stang. Now all is good in the NW
       •Thread Starter
     

    8/17/2020 10:30 PM  #66

    Cab4word67
    Senior 24-7 FYI Addict

    Offline

    From: Portland, Ore
    Registered: 4/06/2019
    Posts: 1,154

    Re: PUTTIN IN A LIFT

    Lift got assembled today and the door hardware arrived. so tomorrow we move door

    Slammed Big Blue, ran over the varmints that messed with the Stang. Now all is good in the NW
       •Thread Starter
     

    8/18/2020 5:48 AM  #67

    Nos681
    Senior 24-7 FYI Addict

    Offline

    From: Atlantic Mine, Michigan
    Registered: 7/14/2016
    Posts: 3,336

    Re: PUTTIN IN A LIFT

    Looks great Chris.
    Amazed at the speed you get things done.
    A helping hand is always nice too.

     

    8/18/2020 9:50 AM  #68

    Prof
    FYI Addict

    Offline

    From: Dallas / McKinney, TX
    Registered: 4/04/2013
    Posts: 254

    Re: PUTTIN IN A LIFT

    In your above picture posted on 8/15, there's a tiny steering wheel hanging next to your air hose reel. 
    Ugh! That reminds me of amateur street drag racing days 40 years ago. (well, ok, it was more years than that)
    What size is that? and please tell me you never put that on your fine Mustang.

    Last edited by Prof (8/18/2020 9:53 AM)

     

    8/18/2020 10:37 AM  #69

    Rudi
    Senior 24-7 FYI Addict

    Offline

    From: Stuck in the 50's Welland Ca
    Registered: 4/01/2013
    Posts: 3,976

    Re: PUTTIN IN A LIFT

    Hey Paul, looking at your avatar. Is that your car, if so  can you tell us more about it. Looks very interesting.

    Good work ain't cheap, Cheap work ain't good!   Simple Man
     

    8/18/2020 5:19 PM  #70

    6sally6
    Hyper FYIFORD ADDICT

    Offline

    From: Surfside Beach,SC
    Registered: 4/02/2013
    Posts: 6,855

    Re: PUTTIN IN A LIFT

    Rudi wrote:

    Hey Paul, looking at your avatar. Is that your car, if so  can you tell us more about it. Looks very interesting.

     

    I think he means PROF!
    I wanna know too!
    6sal6

    Get busy Liv'in or get busy Die'n....Host of the 2020 Bash at the Beach/The only Bash that got cancelled  )8
     

    8/19/2020 5:32 PM  #71

    Cab4word67
    Senior 24-7 FYI Addict

    Offline

    From: Portland, Ore
    Registered: 4/06/2019
    Posts: 1,154

    Re: PUTTIN IN A LIFT

    OK we got pics of the new lift in the newly remodeled garage. First up is the stang while the old door header was still up behind it. Then a pick of the wifes car. that we first tested  with just in case. Another pick of the mustang in park mode and has plenty of clearance everywhere. And we lifted a 65 lonnnng box and made it into service height of 67" to the bottom of ramps and has room to go up one more click. Tomorrow I  will finish the drywall and get the electrical buttoned up so I can install the new LED lights. Lots to do yet so little time to do. Sure am glad the roof is done. Hoist will cost me money as I found the muffler is going on the wifes car and it has a oil leak. LOL
    oh we fixed the light on the opener too.

    Last edited by Cab4word67 (8/19/2020 5:44 PM)

    Slammed Big Blue, ran over the varmints that messed with the Stang. Now all is good in the NW
       •Thread Starter
     

    8/19/2020 6:11 PM  #72

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,266

    Re: PUTTIN IN A LIFT

    I mounted an air hose reel on the rack leg closest to the garage door.  Also an electrical plug reel.  Comes in real handy.

    You are making great progress!

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

    8/20/2020 9:08 AM  #73

    Cab4word67
    Senior 24-7 FYI Addict

    Offline

    From: Portland, Ore
    Registered: 4/06/2019
    Posts: 1,154

    Re: PUTTIN IN A LIFT

    I agree, already have them both, air at each end on the wall and my power reel will be relocated to the center. I am working on LED lighting and have a good plan. Will up date on it later.

    Slammed Big Blue, ran over the varmints that messed with the Stang. Now all is good in the NW
       •Thread Starter
     

    8/20/2020 9:11 AM  #74

    Cab4word67
    Senior 24-7 FYI Addict

    Offline

    From: Portland, Ore
    Registered: 4/06/2019
    Posts: 1,154

    Re: PUTTIN IN A LIFT

    Prof wrote:

    In your above picture posted on 8/15, there's a tiny steering wheel hanging next to your air hose reel. 
    Ugh! That reminds me of amateur street drag racing days 40 years ago. (well, ok, it was more years than that)
    What size is that? and please tell me you never put that on your fine Mustang.

    Just read your post on my steering wheel. LOL no but I did have it on a 66 belvedere wagon with possi 
     

    Slammed Big Blue, ran over the varmints that messed with the Stang. Now all is good in the NW
       •Thread Starter
     

    8/20/2020 10:58 AM  #75

    bearcat
    I FYI 24-7

    Offline

    From: Twin falls, Idaho
    Registered: 4/01/2013
    Posts: 337

    Re: PUTTIN IN A LIFT

    Looks great!

    65 coupe, 351w, c4, power disk brakes, power r&p, vintage air.
     

     

    1 2 3 4 5  Jump to

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  PUTTIN IN A LIFT

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.