FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

8/21/2020 11:48 AM  #1


Air Craft stripper non metholyn chloride

So here in SLC we cannot get the old formula of the aircraft stripper. I found out that if you add some lacquer thinner it helps the stripper stay liquid and it helps the stripper do itz job. Hope this helps some people out.

 

8/24/2020 1:43 PM  #2


Re: Air Craft stripper non metholyn chloride

Thanks for the tip.


Money you enjoy wasting is NOT wasted money... unless your wife finds out.
 

9/10/2020 1:51 PM  #3


Re: Air Craft stripper non metholyn chloride

I also found that covering the part you are stripping with plastic sheeting makes the stripper work better as it doesn't allow the chemicals to evaporate as fast.


68 coupe - 351W, 4R70W, 9" 3.25 -- 65 convertible - 289 4v, C4, 8" 3.00
 

Board footera


REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.