FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » MS brake conversion brake line question

    • 1 of 1

       

    10/21/2020 7:31 PM  #1

    Steve69
    Senior 24-7 FYI Addict

    Offline

    From: Madison Wisconsin
    Registered: 4/01/2013
    Posts: 2,739

    MS brake conversion brake line question

    Hey guys got my adapter for my line and had a question on the MS instructions with disc brake bracket kit. It talks about the stock bracket being riveted to the line. The bracket has to come off line so it can be cut and welded. My question is how do I get the bracket off the line so I can attach it again after it’s modified? It looks like it’s permanent!

     

    Last edited by Steve69 (10/21/2020 7:53 PM)

     

    10/22/2020 9:30 AM  #2

    Steve69
    Senior 24-7 FYI Addict

    Offline

    From: Madison Wisconsin
    Registered: 4/01/2013
    Posts: 2,739

    Re: MS brake conversion brake line question

       •Thread Starter
     

    10/22/2020 6:15 PM  #3

    Steve69
    Senior 24-7 FYI Addict

    Offline

    From: Madison Wisconsin
    Registered: 4/01/2013
    Posts: 2,739

    Re: MS brake conversion brake line question

    Thanks MS for explaining the process!  Steve69

       •Thread Starter
     

    10/22/2020 6:50 PM  #4

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,265

    Re: MS brake conversion brake line question

    Steve69 wrote:

    Hey guys got my adapter for my line and had a question on the MS instructions with disc brake bracket kit. It talks about the stock bracket being riveted to the line. The bracket has to come off line so it can be cut and welded. My question is how do I get the bracket off the line so I can attach it again after it’s modified? It looks like it’s permanent!

     

     

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

    10/23/2020 8:16 AM  #5

    Steve69
    Senior 24-7 FYI Addict

    Offline

    From: Madison Wisconsin
    Registered: 4/01/2013
    Posts: 2,739

    Re: MS brake conversion brake line question

    MS wrote:

    Steve69 wrote:

    Hey guys got my adapter for my line and had a question on the MS instructions with disc brake bracket kit. It talks about the stock bracket being riveted to the line. The bracket has to come off line so it can be cut and welded. My question is how do I get the bracket off the line so I can attach it again after it’s modified? It looks like it’s permanent!

     

      Thanks!
     

     

       •Thread Starter
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  MS brake conversion brake line question

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.