FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

1/15/2021 7:19 PM  #1


Electrical connectors for 66 Mustang

Sorry if this has been covered before but i'm looking for connectors for my 66 Mustang 289, specifically the ones that come through the bulkhead for the gauges harness. I think that they have 8 wires hooked into them. From memory, there are 2 of them in the bulkhead and I need both male and female plugs. Any info on all connectors would be greatly appreciated.
Many Thanks.

 

1/15/2021 8:25 PM  #2


Re: Electrical connectors for 66 Mustang

Might try Randy at Midlife.


Bob. 69 Mach 1, 393W, SMOD Toploader, Armstrong  steering, factory AC.
 

1/15/2021 9:21 PM  #3


Re: Electrical connectors for 66 Mustang

Thanks for the reply. Please could you be more specific as in what is Midlife?
Thanks.

     Thread Starter
 

1/15/2021 9:43 PM  #4


Re: Electrical connectors for 66 Mustang

Here ya go, Graham.  How's the project coming along?  Don't hear too much from you so it's good to see you are still at it.
Midlife Harness Restoration

http://midlifeharness.com/


"you get what you pay for, good work isn't cheap, and there are NO free lunches...PERIOD!"
 

1/16/2021 6:41 PM  #5


Re: Electrical connectors for 66 Mustang

Thanks Bob.
Getting it on the road this year...finally. Been teaching the daughter how to drive so that I don't have to spend all my time running her about and doing jobs around the house for my wife. Its my year this year.

Regards.

     Thread Starter
 

Board footera


REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.