FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

11/09/2022 5:00 PM  #1


315/35 17 test fit 66 coupe DSE mini tubs.

I found two used tires in the size that DSE claims will fit their mini tub kit.  Bought the tires for $20 but had to ship them.  Figure it’s cheaper to spend $100 than make a mistake on new ones. 

Happy to say it looks like they fit pretty good.






 

11/09/2022 11:05 PM  #2


Re: 315/35 17 test fit 66 coupe DSE mini tubs.

Those be some big shoes. What size you gonna run up front?


Bob. 69 Mach 1, 393W, SMOD Toploader, Armstrong  steering, factory AC.
 

11/10/2022 4:45 AM  #3


Re: 315/35 17 test fit 66 coupe DSE mini tubs.

Bearing Bob wrote:

Those be some big shoes. What size you gonna run up front?

 
Not sure yet but as wide as I can.  I need to research it more and see what will fit with the Rod & Custom MII setup.

     Thread Starter
 

11/10/2022 8:28 AM  #4


Re: 315/35 17 test fit 66 coupe DSE mini tubs.

Dies that require spring relocation?  I tried some 275x45/17 tires on my 66 once. They were hard against the spring and the outer quarter.


Money you enjoy wasting is NOT wasted money... unless your wife finds out.
 

11/10/2022 9:04 AM  #5


Re: 315/35 17 test fit 66 coupe DSE mini tubs.

With the DSE mini-tubs, I believe one must eliminate the rear seat, or cut it down to fit with the mini-tubs.  Just wondering, what you’re planning to do?


65 Fastback, 351W, 5-speed, 4 wheel discs, 9" rear,  R&C Front End.
 

11/10/2022 10:22 AM  #6


Re: 315/35 17 test fit 66 coupe DSE mini tubs.

BobE wrote:

With the DSE mini-tubs, I believe one must eliminate the rear seat, or cut it down to fit with the mini-tubs.  Just wondering, what you’re planning to do?

 
I’m not sure if I ever shared the pictures on here where I cut down the bare seat frames to mock it all up.  The original plan was to run a back seat but I’m now leaning towards no back seat and installing a four bar with a cross bar for shoulder strap mounting.

So running a rear seat IMO is an easy thing to do on the coupe.   I could dig up the pictures and post to this thread.

     Thread Starter
 

11/10/2022 10:39 AM  #7


Re: 315/35 17 test fit 66 coupe DSE mini tubs.

Awesome-sauce!!
Like the pics.........a lot !
6sally6


Get busy Liv'in or get busy Die'n....Host of the 2020 Bash at the Beach/The only Bash that got cancelled  )8
 

11/10/2022 10:40 AM  #8


Re: 315/35 17 test fit 66 coupe DSE mini tubs.




Get busy Liv'in or get busy Die'n....Host of the 2020 Bash at the Beach/The only Bash that got cancelled  )8
 

11/11/2022 7:58 AM  #9


Re: 315/35 17 test fit 66 coupe DSE mini tubs.

What about the spring?  I noticed there isn’t one in your mockup pic. Does it get relocated?
I might want to do this on a future build, but there are constraints.


Money you enjoy wasting is NOT wasted money... unless your wife finds out.
 

11/11/2022 12:16 PM  #10


Re: 315/35 17 test fit 66 coupe DSE mini tubs.

MS...The rear kit looks like a Street or Tracks 3 link system. So springs are eleminated.

 

11/11/2022 12:39 PM  #11


Re: 315/35 17 test fit 66 coupe DSE mini tubs.

MS wrote:

What about the spring?  I noticed there isn’t one in your mockup pic. Does it get relocated?
I might want to do this on a future build, but there are constraints.

 
I original had relocated the leafs with the Crites kit.   I reversed the relocation work and installed the SoT three link.  I had to modify the SoT WATTS link bracket to fit the narrowed frame sections from the DSE mini tub kit.

     Thread Starter
 

11/11/2022 6:26 PM  #12


Re: 315/35 17 test fit 66 coupe DSE mini tubs.

I sure do like the idea of a watts link. Is there a kit that has upper coil spring mounts etc?
Show some pics when you get it in there.


Money you enjoy wasting is NOT wasted money... unless your wife finds out.
 

11/12/2022 1:17 AM  #13


Re: 315/35 17 test fit 66 coupe DSE mini tubs.

MS wrote:

I sure do like the idea of a watts link. Is there a kit that has upper coil spring mounts etc?
Show some pics when you get it in there.

 
https://fyi.boardhost.com/viewtopic.php?id=12733

Here’s my old post showing the installation of the SoT kit.  The lower bar/coil over mounts have been moved inboard to allow the 315 tire to fit  This is down per the SoT instructions.  I also choose the longer lower arms because I was not using the stock from leaf spring mount for the lower bar location.

     Thread Starter
 

11/12/2022 7:37 AM  #14


Re: 315/35 17 test fit 66 coupe DSE mini tubs.

Does it get a watts link?  Or a panhard bar?  Looks like pics were prior to assembling that part.


Money you enjoy wasting is NOT wasted money... unless your wife finds out.
 

11/12/2022 11:49 AM  #15


Re: 315/35 17 test fit 66 coupe DSE mini tubs.

MS wrote:

Does it get a watts link?  Or a panhard bar?  Looks like pics were prior to assembling that part.

 
The SoT is a WATTS link setup. 


https://streetortrack.com/street-or-track-mustang-rear-bilstein-3-link-system

     Thread Starter
 

11/13/2022 11:43 AM  #16


Re: 315/35 17 test fit 66 coupe DSE mini tubs.

Mathematically the 315 will be a tight fit.   I don’t think I can tuck it under as much as I would like.  The tightest spot measures out to be 13 inches.   Tire manufacturer says the tire is 12.6 wide.  Currently the tire is at 12 inches with no rim.   My plan is to order a 10 inch rim.  Tire manufacturer recommends the smallest rim width of 10.5.  The rims I want don’t come in 10.5 widths. Plus the 10 inch will work well with a 305 tire.


     Thread Starter
 

11/13/2022 9:56 PM  #17


Re: 315/35 17 test fit 66 coupe DSE mini tubs.

May need to 'roll-that-wheel well-lip' just a tad!
6s6


Get busy Liv'in or get busy Die'n....Host of the 2020 Bash at the Beach/The only Bash that got cancelled  )8
 

11/14/2022 5:46 AM  #18


Re: 315/35 17 test fit 66 coupe DSE mini tubs.

6sally6 wrote:

May need to 'roll-that-wheel well-lip' just a tad!
6s6

 
Already rolled them when I replaced the panels.

     Thread Starter
 

11/16/2022 2:05 PM  #19


Re: 315/35 17 test fit 66 coupe DSE mini tubs.

I'm doing the same setup on my 65.  Look forward to following your progress.

Last edited by Glens 1965 50 (11/24/2022 8:31 AM)

 

11/24/2022 6:31 AM  #20


Re: 315/35 17 test fit 66 coupe DSE mini tubs.

Hopefully I can now start to focus on my build more.  Last week I finished the last of my training for work.  Now I’m trying to figure out where I can spend what money I have for the project.   Really want to finish the bodywork and paint it but I would like to order rims and tires.

     Thread Starter
 

12/01/2022 5:12 PM  #21


Re: 315/35 17 test fit 66 coupe DSE mini tubs.

The tire fitment tool was in stock so I ordered it.  Pretty happy with it.    It’s setup for a 10.5 rim with 7 inches of back spacing.  I think I will be okay with the 315. 



     Thread Starter
 

12/01/2022 5:35 PM  #22


Re: 315/35 17 test fit 66 coupe DSE mini tubs.

RTM..... Do you have a link for that tool?

 

12/01/2022 6:51 PM  #23


Re: 315/35 17 test fit 66 coupe DSE mini tubs.

Glens 1965 50 wrote:

RTM..... Do you have a link for that tool?

 
https://www.speedwaymotors.com/Wheel-Fitment-Tool-for-Tire-Fit-Testing-Size-Measuring-Mockup,485869.html

     Thread Starter
 

12/02/2022 8:23 AM  #24


Re: 315/35 17 test fit 66 coupe DSE mini tubs.

Thanks

 

Board footera


REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.