FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » What have you used to plug the 4 upper holes in a Shelby drop

    • 1 of 1

       

    4/08/2013 4:41 PM  #1

    jerseyjoe
    I FYI 24-7

    Offline

    Registered: 4/01/2013
    Posts: 789

    What have you used to plug the 4 upper holes in a Shelby drop

    ....jj

    "Never put a question mark where God put a period "  Richard Petty
     

    4/08/2013 4:55 PM  #2

    boomyal
    Senior 24-7 FYI Addict

    Offline

    From: Vancouver, Washington
    Registered: 4/01/2013
    Posts: 1,295

    Re: What have you used to plug the 4 upper holes in a Shelby drop

    jerseyjoe wrote:

    ....jj

    Just went to the local hardware store and rummaged through their nut and bolt hardware section.  Found some little plastic plugs of the correct diameter and snapped them into the holes.

     

    4/08/2013 5:15 PM  #3

    MWM
    I FYI 24-7

    Offline

    Registered: 4/01/2013
    Posts: 423

    Re: What have you used to plug the 4 upper holes in a Shelby drop

    JJ,
    If you still have it apart, there is an upgrade to help stiffen the area. Buy some plate metal and a couple of extra bolts both sides. Cut and drill the plate to accept the new holes and the old holes then bolt it in. This will box in the area and make it stronger. I did this for open track racing and helps on a daily driver too. 
     

     

    4/08/2013 6:49 PM  #4

    Rudi
    Senior 24-7 FYI Addict

    Offline

    From: Stuck in the 50's Welland Ca
    Registered: 4/01/2013
    Posts: 3,933

    Re: What have you used to plug the 4 upper holes in a Shelby drop

    Weld.

    Good work ain't cheap, Cheap work ain't good!   Simple Man
     

    4/08/2013 7:55 PM  #5

    Daze
    Forum Moderator & Bash host 2011

    Offline

    From: Kalispell MT
    Registered: 1/24/2013
    Posts: 1,129

    Re: What have you used to plug the 4 upper holes in a Shelby drop

    mine are left open

    If it isn't broken...modify it anyway! http://www.DazeCars.com https://galaxieforum.boardhost.com
     

    4/08/2013 8:16 PM  #6

    McStang
    I FYI 24-7

    Offline

    From: Benicia, CA
    Registered: 4/01/2013
    Posts: 495

    Re: What have you used to plug the 4 upper holes in a Shelby drop

    Open here too.

    (Pinto!)
     

    4/08/2013 8:35 PM  #7

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,155

    Re: What have you used to plug the 4 upper holes in a Shelby drop

    Left the old holes open for that day when I go "back to original".

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

    4/08/2013 8:41 PM  #8

    terry
    Senior 24-7 FYI Addict

    Offline

    From: vandalia, illinois
    Registered: 4/01/2013
    Posts: 1,868

    Re: What have you used to plug the 4 upper holes in a Shelby drop

    I plan on leaving mine open as well.  it's not like there are not any open holes in my inner fenders!

     

    4/08/2013 8:57 PM  #9

    Muzz 66
    I FYI 24-7

    Offline

    From: Madera, California
    Registered: 4/01/2013
    Posts: 415

    Re: What have you used to plug the 4 upper holes in a Shelby drop

    If you leave 'em open them swab the insides with some paint so they don't get rusty and unsightly.

    '66 Fastback since July 27, 1981. Springtime Yellow, originally a 200 cu in, 4 speed. Also a '92 LX Coupe, 5.0, 5 speed.
     

    4/09/2013 6:04 AM  #10

    jerseyjoe
    I FYI 24-7

    Offline

    Registered: 4/01/2013
    Posts: 789

    Re: What have you used to plug the 4 upper holes in a Shelby drop

    I like the plastic plug idea.....  jj

    "Never put a question mark where God put a period "  Richard Petty
       •Thread Starter
     

    4/09/2013 8:23 AM  #11

    Don
    Senior 24-7 FYI Addict

    Offline

    From: Coppell, Texas
    Registered: 4/02/2013
    Posts: 1,220

    Re: What have you used to plug the 4 upper holes in a Shelby drop

    dammm trying to post not reply  hummmm  

    Last edited by Don (4/09/2013 8:24 AM)

     

    4/09/2013 9:18 AM  #12

    Tubo
    2008 BASH V Host

    Offline

    From: Ft. Walton Beach, Florida
    Registered: 4/01/2013
    Posts: 1,841

    Re: What have you used to plug the 4 upper holes in a Shelby drop

    boomyal wrote:

     Found some little plastic plugs of the correct diameter and snapped them into the holes.

    +1 on Boom's idea
    Mine are Au Natural for now

     

    If it ain't broke, I haven't modified it Yet
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  What have you used to plug the 4 upper holes in a Shelby drop

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.