FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

2/15/2021 11:12 AM  #26


Re: Well how cold is it in your area??

Cab4word67 wrote:

Ok we mite not be _?? but at 25 we have had some narrly Ice and my dauther lost her power when the tree came down due to Ice. I went over and put a 6KW gen in so she could have heat and refer, plus a couple lights and phone charger. Power company said first you got to get a lin. electrician to verifie the stub coming out of her roof is all good then when they get out there they will hook up. Problem is there were 4 miles of downed wires on my way over to here hose. They said 10-14 days easy. love the ice storms. NOT

I'm sure you know this, Chris, but for anyone who doesn't....If you run a generator through the house wiring  be very sure to open the main breaker and connect the generator downstream.  Otherwise your generator will back-feed the pole-top transformer and energize the source line at nominal voltage...1.7 to 4Kv or maybe more depending on the system.  The guys working on the lines should be testing for energized lines....butt........
This is why backup systems all have an automatic transfer switch to isolate emergency generators from the system...so linemen don't get toasted.

 


"you get what you pay for, good work isn't cheap, and there are NO free lunches...PERIOD!"
 

2/15/2021 6:13 PM  #27


Re: Well how cold is it in your area??

Cab4word67 wrote:

Ok           I went over so she could have refer

Chris.......You PNW guys sure have your priorities  in the right place!!!!!!      (just couldn't resist!!)
6sal6
 


Get busy Liv'in or get busy Die'n....Host of the 2020 Bash at the Beach/The only Bash that got cancelled  )8
 

2/15/2021 6:44 PM  #28


Re: Well how cold is it in your area??

18 degrees and power went out for rolling blackout at 6:15pm.  Luckily had just lit gas fireplace at 6:12.   It WILL NOT LIGHT without electricity. The gas valve won’t open without electricity.


Money you enjoy wasting is NOT wasted money... unless your wife finds out.
 

2/15/2021 8:45 PM  #29


Re: Well how cold is it in your area??

Currently 19 degrees and clear..... so this is what you guys up north deal with on a yearly basis???

I don’t like it. 🤐 Power has been out since 2:30 this morning. Gas fireplace and stove with isolating the living room is keeping us warm for now.


John  -- 67 Mustang Coupe 390 5 speed
 

2/16/2021 8:35 AM  #30


Re: Well how cold is it in your area??

It's hard to beat an ol wood stove for reliability....

 

2/16/2021 9:41 AM  #31


Re: Well how cold is it in your area??

Bolted hope that ain't your cooking stove. About every other year you hear on the news around hear about a Carbon Monoxide death from someone using the stove for heat.


If this forum can't fix it, it isn't broke.
 

2/16/2021 9:44 AM  #32


Re: Well how cold is it in your area??

red351 wrote:

It's hard to beat an ol wood stove for reliability....

Yep, mine works power off, power on Gas off, no problem, as long as I got a match.


If this forum can't fix it, it isn't broke.
 

2/16/2021 9:50 AM  #33


Re: Well how cold is it in your area??

This morning iPhone weather said it was 1 deg F where I am in DFW. No thanks! The snow is pretty, but I am looking forward to it melting and things getting back to normal

 

2/16/2021 4:10 PM  #34


Re: Well how cold is it in your area??

wsinsle wrote:

Bolted hope that ain't your cooking stove. About every other year you hear on the news around hear about a Carbon Monoxide death from someone using the stove for heat.

Thanks for the warning, some of those unfortunate happenings around here too. It was the cooking stove. We ran the stove about 30-40 minutes at a time then turn them off for several hours.... I don't see any difference in that and cooking. It was not run while we were sleeping. The fire place got cranked up about 4 am on Monday. On a good note, the power came back on about 11 this morning. 
 


John  -- 67 Mustang Coupe 390 5 speed
 

2/16/2021 5:17 PM  #35


Re: Well how cold is it in your area??

wsinsle wrote:

red351 wrote:

It's hard to beat an ol wood stove for reliability....

Yep, mine works power off, power on Gas off, no problem, as long as I got a match.

And Wood!


 


Gary Zilik - Pine Junction, Colorado - 67 Coupe, 289-4V, T5
 

2/16/2021 5:27 PM  #36


Re: Well how cold is it in your area??

I love a wood stove. I had one in my old house that I brought with me to my new house and it's been sitting in my basement for the last 8 years because there is nowhere in my house to instal it where the flu pipe won't run past a window.  But I refuse to get rid of it and will save it for the next house, unless the next house is in FL. LOL!

 

2/16/2021 5:49 PM  #37


Re: Well how cold is it in your area??

You've got other issues if your cooktop emits enough carbon monoxide to kill ya.

I'd light my wood stove if we dip into the forties.


Bob. 69 Mach 1, 393W, SMOD Toploader, Armstrong  steering, factory AC.
 

2/16/2021 5:54 PM  #38


Re: Well how cold is it in your area??

It has been a dream of mine to have a nice library with a big wood fireplace and some oversized leather chairs. I MUCH prefer wood over gas, the few times we've used our gas fireplace I feel like it dried out the air really bad. Anyway I'd sit in that room, read, have an adult beverage, and smoke cigars on days like we've been having.

Last edited by Raymond_B (2/16/2021 5:54 PM)

 

2/16/2021 6:34 PM  #39


Re: Well how cold is it in your area??

Update out here in the PNW, I did turn off her breaker and disconnected the supply to the furnace. Then installed a pig tail so we could plug it in. I told them if they need heat after the power is restored (2 weeks out they are saying) all they would have to do is plug the thing into an outlet tell I get over to re wire it. All good
Next she went online looking for a Honda gen and found one local. They picked it up today and are so happy they are now generating on eco quite Honda power. Big improvement on fuel consumption too over the 25 year old dinosaur. 


Slammed Big Blue, ran over the varmints that messed with the Stang. Now all is good in the NW
 

2/16/2021 11:16 PM  #40


Re: Well how cold is it in your area??

Been below Zero for about a week.  Internet froze up.  Kinda works now.


Volvo!
 

2/17/2021 5:23 PM  #41


Re: Well how cold is it in your area??

Bearing Bob wrote:

You've got other issues if your cooktop emits enough carbon monoxide to kill ya.

No, this happens with someone running the stove top and oven in a small apartment all day as their only source of heat. As bolted said a 1/2 hour of stove top is no different than cooking but to run everything all day can be deadly. I would not recommend  using this as your sole source of heat. I'll bet a stove top and oven uses more gas per hour than a vented gas furnace.
 


If this forum can't fix it, it isn't broke.
 

2/17/2021 5:36 PM  #42


Re: Well how cold is it in your area??

wsinsle wrote:

Bearing Bob wrote:

You've got other issues if your cooktop emits enough carbon monoxide to kill ya.

No, this happens with someone running the stove top and oven in a small apartment all day as their only source of heat. As bolted said a 1/2 hour of stove top is no different than cooking but to run everything all day can be deadly. I would not recommend  using this as your sole source of heat. I'll bet a stove top and oven uses more gas per hour than a vented gas furnace.
 

Of course it does because its on all the time.  A gas furnace burns until it reaches temperature then shuts off until called to heat again.  In theory propane and natural gas burn clean, but I wouldn't test it.  I also don't know that a hood will clear CO, because its a low lying gas.  Use the furnace for heat and the stove/oven to cook.  I think you'll live longer. 
 

 

2/18/2021 2:07 AM  #43


Re: Well how cold is it in your area??

You guys have exhaust vent hoods above your cooktops in your area of the world? Pretty sure restaurants run their many gas cooktops on full blast all day long.


Bob. 69 Mach 1, 393W, SMOD Toploader, Armstrong  steering, factory AC.
 

2/18/2021 7:04 AM  #44


Re: Well how cold is it in your area??

Bearing Bob wrote:

You guys have exhaust vent hoods above your cooktops in your area of the world? Pretty sure restaurants run their many gas cooktops on full blast all day long.

They sure do, and some use them for heat instead of paying to run the heater.  I had sprinkler pipes burst twice in the Chinese joint in the shopping center we used to own because they wouldn't run the heat and at night it was super cold and the pipes froze.  I gave them one mulligan, but the second time they had to pay for it.  I told them, just set the heat at 45 for the night and it won't happen again.  Once it hurt their pocket they listened.

BUT, a commercial exhaust hood is TOTALLY different than a residential one.  They are designed with the idea that they will be in use for hours.  They use massive ducting and rooftop fans.  They move a ton of air.  Residential hoods by contrast move very little.  They have filters most people never clean and are packed with grease.  If the hood is part of a microwave often they are not even tied into ductwork.  They self vent, basically recycling the air through a filter because the location of the hood makes getting the exhaust to the exterior too difficult, or the run would be too long to be effective.  I'd count on a properly vented and maintained residential hood to pull the smells and haze out of my kitchen, but I wouldn't stake my life on it. 

 

2/18/2021 2:49 PM  #45


Re: Well how cold is it in your area??

Not all of the houses we've lived in had vent hoods that ducted outside. On another thought, if I could run an vent hood, I could run a furnace. 

Seems like carbon monoxide was less of an issue when houses were really drafty or poorly constructed. I was using a sawzaw to cut in a plug on an exterior wall of an old house with ship-lap interior wall coverings, pre sheet rock days. It really surprised me that I could see the ground out side through the plug hole I cut. 

 


John  -- 67 Mustang Coupe 390 5 speed
 

2/18/2021 4:53 PM  #46


Re: Well how cold is it in your area??

Yeah, now the house should be able to be heated with a candle.  Old houses had no insulation, but properly heated stone and masonry I've noticed hold heat for a long time.  Wood frame and single pane windows not so much.  No blocking between floors either, so if the walls line up you can chase stuff from the basement to the attic without drilling a single hole.  The problem is that if it catches fire the fire can do the same thing. 

 

2/19/2021 11:01 AM  #47


Re: Well how cold is it in your area??

Just finished plowing and shoving last nights 4" of snow & slush. Sun is getting warmer each day, so most of what's left of previous storm will be gone by the middle of the week. High's of 50

 

2/20/2021 5:29 PM  #48


Re: Well how cold is it in your area??

dave68 wrote:

Calgary Alberta Canada -
34 Celsius ........ - 30  Fahrenheit
Windy Chill - 44 Celsius............................. - 47 Fahrenheit

Its been a cold week stay warm.

Dave, good to hear from you.  I recall that you said you would not be doing another Bash until you  got retired...did that happen yet?   Maybe if we talked Day into having another one in Kalispell,  I loved that trip.  Anyway, glad you are still hanging around, our best to Maria and you.  Hope we get to see you again some day, but don't wait too long, some of us are getting pretty geezerly.

BB1


"you get what you pay for, good work isn't cheap, and there are NO free lunches...PERIOD!"
 

Board footera


REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.