FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

4/09/2021 9:57 PM  #1


On the eleventh week

And then the gods rested, This has been very hard on me for some time now as it got to me. Go figure. 
It has been 10 weeks since I got my engine back from the shop, and started my assembly and  install. Hey i got 50 miles on it with flat lobes and all. And 2 weeks since the shop said they would make it right. They rebuilt the whole bottom end with new bearings, gave me a new cam, cam bearings, lifters, heads, made sure the pushrods were correct. Making sure there was no coil bind. All the gaskets and new break in oil.  It is going in tomorrow. Tonight It  had the oil pumped through its veins and the intake is set. Tomorrow we will install and break in the new cam. This time I will make sure we have much advance as needed and there is no intake leaks. Also just incase I will only put in water. Then we can drain and install the antifreeze

YEAH I am so happy again. 


Slammed Big Blue, ran over the varmints that messed with the Stang. Now all is good in the NW
 

4/10/2021 10:09 AM  #2


Re: On the eleventh week

Awesome! Good luck I hope to see pics of you driving around soon

 

4/10/2021 5:36 PM  #3


Re: On the eleventh week

thumbs up-thumbs up!!!!!
Fill the carb bowls with gas........triple check the firing order......fully charged battery (and fire extinguisher!!)....advance the dizzy and leave it a little loose so you can give it a turn if it doesn't fire right-away. I like to use Brakleen (I love that stuff) or carb cleaner squirted down the open carb to insure a good shot of fuel..........butt that's just me!
I have the garden hose charged and near by to re-fill the radiator...if necessary.
You GOT-DIS-THANG this time
6sal6


Get busy Liv'in or get busy Die'n....Host of the 2020 Bash at the Beach/The only Bash that got cancelled  )8
 

4/10/2021 5:39 PM  #4


Re: On the eleventh week

https://www.youtube.com/watch?v=_5AwnV3UWUc

Here ya go  Chris !!!!!!!!!!!!
A little how-to video!!!            (One of my favorites!!!)

6s6

Last edited by 6sally6 (4/10/2021 5:41 PM)


Get busy Liv'in or get busy Die'n....Host of the 2020 Bash at the Beach/The only Bash that got cancelled  )8
 

4/11/2021 8:11 AM  #5


Re: On the eleventh week

Hello everyone,
Yesterday we fired it up again. Broke in the cam with NO glowing headers. Temp held around 185-198 max for a 20 minute burn at 2000-2500. Radiator burped one time. Now I will drain the water and put in my antifreeze and check torque on headers. No leaks. Going to retime as 2 plug wires came off at some point  after the brake in. Maybe I will be driving around today...YEAH


Slammed Big Blue, ran over the varmints that messed with the Stang. Now all is good in the NW
     Thread Starter
 

4/11/2021 8:13 AM  #6


Re: On the eleventh week

Loved the vid too


Slammed Big Blue, ran over the varmints that messed with the Stang. Now all is good in the NW
     Thread Starter
 

4/11/2021 8:19 AM  #7


Re: On the eleventh week

Hello everyone,
Yesterday we fired it up again. Broke in the cam with NO glowing headers. Temp held around 185-198 max for a 20 minute burn at 2000-2500. Radiator burped one time. Now I will drain the water and put in my antifreeze and check torque on headers. No leaks. Going to retime as 2 plug wires came off at some point  after the brake in. Maybe I will be driving around today...YEAH


Slammed Big Blue, ran over the varmints that messed with the Stang. Now all is good in the NW
     Thread Starter
 

Board footera


REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.