FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » Used a tapered piston ring compressor for the first time yesterday

    • 1 of 1

       

    4/10/2021 8:38 PM  #1

    MS
    Forum Originator

    Online!

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,260

    Used a tapered piston ring compressor for the first time yesterday

    Holy, CRAP, Batman!!!  How did I ever build engines without one of those?  Just like everyone says...pistons go in by thumb pressure, not one hickup on all eight bores.  It must have saved a couple of hours and a lot of frustration sticking the pistons in the block.   No, Al...that does not equate to a discount.

    Now I have to order one for standard 4.000" bore since I have a couple of those engines to put together.

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

    4/10/2021 8:49 PM  #2

    Nos681
    Senior 24-7 FYI Addict

    Offline

    From: Atlantic Mine, Michigan
    Registered: 7/14/2016
    Posts: 3,334

    Re: Used a tapered piston ring compressor for the first time yesterday

    What model/brand did you use?

     

    4/11/2021 5:36 AM  #3

    TKOPerformance
    Hyper FYIFORD ADDICT

    Offline

    From: Newark, DE
    Registered: 12/15/2014
    Posts: 7,499

    Re: Used a tapered piston ring compressor for the first time yesterday

    Yep, I first used one in about '04 and will never use anything else.  Every now and then I catch a glimpse of them using the old coffee can compressor on one of those car shows and I think to myself "so how much power does the engine make with a couple of broken piston rings?" as they thump the pistons into the block. 

     

    4/11/2021 2:16 PM  #4

    6sally6
    Hyper FYIFORD ADDICT

    Offline

    From: Surfside Beach,SC
    Registered: 4/02/2013
    Posts: 6,853

    Re: Used a tapered piston ring compressor for the first time yesterday

    Yeah.........'I've heard' they are the-cat's-meow!!
    6sal6

    Get busy Liv'in or get busy Die'n....Host of the 2020 Bash at the Beach/The only Bash that got cancelled  )8
     

    4/11/2021 2:31 PM  #5

    MS
    Forum Originator

    Online!

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,260

    Re: Used a tapered piston ring compressor for the first time yesterday

    Mine came from Summit. I think it is ARP.

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
       •Thread Starter
     

    4/11/2021 5:08 PM  #6

    HudginJ3
    Senior 24-7 FYI Addict

    Offline

    From: Cedar Hill, TX
    Registered: 4/29/2015
    Posts: 1,249

    Re: Used a tapered piston ring compressor for the first time yesterday

    Mine box says 'Summit" on it. Was real nice to use. Being the critic that I am it would have been better if the block side had a small ridge on it to fit into the cylinder between that and the piston gap. But as MS says I still saved 7 hours. Mine is for .030 over.

    Last edited by HudginJ3 (4/11/2021 5:10 PM)

    70, ragtop 351W/416 stroker Edel Performer heads w pro flow 4, Comp roller 35-421-8. T5
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  Used a tapered piston ring compressor for the first time yesterday

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.