FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » 68 FOG LIGHT Harnesses and what can be swapped????

    • 1 of 1

       

    1/03/2023 1:14 PM  #1

    M1Mustang69
    I FYI 24-7

    Offline

    Registered: 5/17/2013
    Posts: 490

    68 FOG LIGHT Harnesses and what can be swapped????

    Hi all, can 65, 66 or 67 Fog Light Harnesses be used on a 68?  I obviously want to go factory with factory switches, just curious if I can use other years on it?

    Regards,
    Jeff

     

    1/03/2023 1:32 PM  #2

    Rudi
    Senior 24-7 FYI Addict

    Offline

    From: Stuck in the 50's Welland Ca
    Registered: 4/01/2013
    Posts: 3,971

    Re: 68 FOG LIGHT Harnesses and what can be swapped????

    I don’t see why not, the appear to be all the same.
    The wiring harness is very simple. The one I got included a circuit breaker, switch with associated wires for each lamp and just required an connection to a switched 12v source.
    Got mine over twenty years ago from CJP, one of the first mods I did.

    Good work ain't cheap, Cheap work ain't good!   Simple Man
     

    1/03/2023 2:01 PM  #3

    Rudi
    Senior 24-7 FYI Addict

    Offline

    From: Stuck in the 50's Welland Ca
    Registered: 4/01/2013
    Posts: 3,971

    Re: 68 FOG LIGHT Harnesses and what can be swapped????

    At the time I still had the original wiring in the car ( it has a AAW kit in it now)
    There was no mounting bracket included with the CJP kit so I just tabbed one similar to the pictures of the item.

    Good work ain't cheap, Cheap work ain't good!   Simple Man
     

    1/04/2023 4:10 PM  #4

    M1Mustang69
    I FYI 24-7

    Offline

    Registered: 5/17/2013
    Posts: 490

    Re: 68 FOG LIGHT Harnesses and what can be swapped????

    So the harnesses aren't different? I feel like the 68 plug in is different than the previous years

       •Thread Starter
     

    1/05/2023 10:25 AM  #5

    Mark Z
    FYI Addict

    Offline

    From: Dix Hills, NY
    Registered: 4/01/2013
    Posts: 160

    Re: 68 FOG LIGHT Harnesses and what can be swapped????

    I had an unmolested 68 with original wiring harness. I was able to find the factory fog light connections under the dash and under the hood. My car did not come with the lights , but I added them. Wiring was already there! the switch mounted to the right of steering column hanging under dash, there was an existing hole to mount it there. maybe this helps

     

    1/05/2023 10:40 AM  #6

    Mark Z
    FYI Addict

    Offline

    From: Dix Hills, NY
    Registered: 4/01/2013
    Posts: 160

    Re: 68 FOG LIGHT Harnesses and what can be swapped????

     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  68 FOG LIGHT Harnesses and what can be swapped????

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.