| ||
Visit MustangSteve's web site to view some of my work and find details for: FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events |
1 2 Jump to
Offline
OMG this car is so loud now....it was fairly quite with the 289 2 bbl......but this new engine seems to be over the top loud.
Offline
How loud is it on the “Sally” scale? 😁
I had 2” full exhaust with tri-y’s and 2” turbos for many years.
This was with factory installed sound deadener…and some missing pieces on rear floorboard too.
It was fairly quiet.
Several years ago, a full exhaust system with Hooker full length headers and Summit 2-1/2” turbos.
At interstate speeds, interior conversation was limited to loud talking.
After Rockwall Bash, I had a set of 2-1/4” Magnaflow’s replace the Summit turbos.
Conversation and music (when chosen) is mucho besser.
Last 2 combos have the ACC sound deadener kit (interior/transition hump/gas tank) and the ACC mass backed interior carpet.
I still don’t have sound deadener applied to roof or “c” pillars/sail panels.All combos have been with true dual exhaust as well…no crossover (H or X).
Hope this helps.
Last edited by Nos681 (2/11/2023 8:06 AM)
Offline
Nos681 wrote:
How loud is it on the “Sally” scale? 😁
I had 2” full exhaust with tri-y’s and 2” turbos for many years.
This was with factory installed sound deadener…and some missing pieces on rear floorboard too.
It was fairly quiet.
Several years ago, a full exhaust system with Hooker full length headers and Summit 2-1/2” turbos.
At interstate speeds, interior conversation was limited to loud talking.
After Rockwall Bash, I had a set of 2-1/4” Magnaflow’s replace the Summit turbos.
Conversation and music (when chosen) is mucho besser.
Last 2 combos have the ACC sound deadener kit (interior/transition hump/gas tank) and the ACC mass backed interior carpet.
I still don’t have sound deadener applied to roof or “c” pillars/sail panels.All combos have been with true dual exhaust as well…no crossover (H or X).
Hope this helps.
gonna remove the H pipe and swap the new 40 series Flowmasters and go with some Magnaflow or something.
Offline
Nos681 wrote:
How loud is it on the “Sally” scale? 😁
I had 2” full exhaust with tri-y’s and 2” turbos for many years.
This was with factory installed sound deadener…and some missing pieces on rear floorboard too.
It was fairly quiet.
Several years ago, a full exhaust system with Hooker full length headers and Summit 2-1/2” turbos.
At interstate speeds, interior conversation was limited to loud talking.
After Rockwall Bash, I had a set of 2-1/4” Magnaflow’s replace the Summit turbos.
Conversation and music (when chosen) is mucho besser.
Last 2 combos have the ACC sound deadener kit (interior/transition hump/gas tank) and the ACC mass backed interior carpet.
I still don’t have sound deadener applied to roof or “c” pillars/sail panels.All combos have been with true dual exhaust as well…no crossover (H or X).
Hope this helps.
Getten Older BUTT Smarter Dan?
Offline
I only have "one" word on the subject: Walker QuietPower
Offline
Bullet Bob wrote:
I only have "one" word on the subject: Walker QuietPower
I had 2 brand new ones they were long and 2 different muffler shops said they couldn't do it...I believe yall about them but I aint sure how I would get them on.
Offline
yall post some pics of exactly how the walkers set on your 65-66
Offline
They may be simple; but, I favor Turbos. Mine happen to be Thrush Turbos.
Offline
I need to see what inlet/outlet and pipe size I have maybe walker makes a shorter muffler.
Last edited by BILLY WALTON from GEORGIA (2/11/2023 10:59 AM)
Offline
I have Magnaflows on mine and I like them a lot. They are very mellow/quiet and idle and cruise but have a nice growl when you get on the throttle.
Offline
I had a 2” system with ‘tubo’ mufflers. Switched to a 2.5” system with Magnaflows. I can say that I didn’t notice a sound difference between the two. As there were previous posts regarding mufflers and noise level, I can the only difference my system is that I have turn down exhaust tips on both setups. I’m not saying this decreases the sound, only that my experience if different from others.
Offline
Quicksilver wrote:
Nos681 wrote:
How loud is it on the “Sally” scale? 😁
I had 2” full exhaust with tri-y’s and 2” turbos for many years.
This was with factory installed sound deadener…and some missing pieces on rear floorboard too.
It was fairly quiet.
Several years ago, a full exhaust system with Hooker full length headers and Summit 2-1/2” turbos.
At interstate speeds, interior conversation was limited to loud talking.
After Rockwall Bash, I had a set of 2-1/4” Magnaflow’s replace the Summit turbos.
Conversation and music (when chosen) is mucho besser.
Last 2 combos have the ACC sound deadener kit (interior/transition hump/gas tank) and the ACC mass backed interior carpet.
I still don’t have sound deadener applied to roof or “c” pillars/sail panels.All combos have been with true dual exhaust as well…no crossover (H or X).
Hope this helps.Getten Older BUTT Smarter Dan?
Naw… I’m still a dumb kid inside…ask my wife.🤣
Offline
BILLY WALTON from GEORGIA wrote:
yall post some pics of exactly how the walkers set on your 65-66
Steve had already done this. Search Walker Quiet Flow... or don't.
Offline
BILLY WALTON from GEORGIA wrote:
Nos681 wrote:
How loud is it on the “Sally” scale? 😁
.BILLY sez....
gonna remove the H pipe and swap the new 40 series Flowmasters and go with some Magnaflow or something.
6sally6 flash..........!!!
I removed my X-pipe because it wasn't loud/healthy sounding enough!!
"You remove dat pipe bow-ee and...... she gonna sound likea hot-rod!!"
6s6
Offline
BILLY........do ya have 4-tube headers?
2 1/2" pipes?
tail pipes go to the rear bumper?
any sound dampening inside car?
Did the valves settle down?!!
6sal6
Offline
I have Walker Quiet Flows Billy and love em!
Also, how about a video of your rig running?
Offline
Quiet Power, Quiet Flow...whichever....they are made in various tube sizes and lengths. I went from a 2.5 to a 2" system with a plus/minus 17" Quiet Flow muffler. I'll try to find the part # if Josh doesn't chime in here first...he's running the same ones. No crossover, no drone, reasonably quiet but then everything is to me. Good note on the throttle.
Offline
Bullet Bob wrote:
Quiet Power, Quiet Flow...whichever....they are made in various tube sizes and lengths. I went from a 2.5 to a 2" system with a plus/minus 17" Quiet Flow muffler. I'll try to find the part # if Josh doesn't chime in here first...he's running the same ones. No crossover, no drone, reasonably quiet but then everything is to me. Good note on the throttle.
I had some of these
Offline
Yes, those are too long for easy install in an early Mustang. MS got 'em in there but it was a chore from what he said. The ones I have are 2" in and out and the body is 16 or 16 1/2. I get that number for you soon as I can. They made a nice install and they sound good to me. Not noisy but seem to let the engine breath and sound good when pushed a bit.
Offline
Walker Quiet flows. Nice sound with a hipo motor.
Offline
Bullet Bob wrote:
Quiet Power, Quiet Flow...whichever....they are made in various tube sizes and lengths. I went from a 2.5 to a 2" system with a plus/minus 17" Quiet Flow muffler. I'll try to find the part # if Josh doesn't chime in here first...he's running the same ones. No crossover, no drone, reasonably quiet but then everything is to me. Good note on the throttle.
Part # 22430........purchased via Summit Racing.....
Offline
josh-kebob wrote:
Bullet Bob wrote:
Quiet Power, Quiet Flow...whichever....they are made in various tube sizes and lengths. I went from a 2.5 to a 2" system with a plus/minus 17" Quiet Flow muffler. I'll try to find the part # if Josh doesn't chime in here first...he's running the same ones. No crossover, no drone, reasonably quiet but then everything is to me. Good note on the throttle.
Part # 22430........purchased via Summit Racing.....
thanks I need to see how the pipes enter and exit the current mufflers
Offline
josh-kebob wrote:
Bullet Bob wrote:
Quiet Power, Quiet Flow...whichever....they are made in various tube sizes and lengths. I went from a 2.5 to a 2" system with a plus/minus 17" Quiet Flow muffler. I'll try to find the part # if Josh doesn't chime in here first...he's running the same ones. No crossover, no drone, reasonably quiet but then everything is to me. Good note on the throttle.
Part # 22430........purchased via Summit Racing.....
Also I am pretty sure I put 2.5 pipes
Offline
Bunch-O-Girls !!! (EEEeeewwww....too noisy girl-please)
6sally6
Offline
6sally6 wrote:
Bunch-O-Girls !!! (EEEeeewwww....too noisy
girl-please)
6sally6
LOL
1 2 Jump to
REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on. |