FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » Show Your Mustang Pictures and History
  •  » The Phoenix Project

    • 1 … 4 5 6  Jump to

       

    9/20/2023 4:17 PM  #126

    Hakan
    FYI FORD Moderator

    Offline

    From: Långrör, Sandarne, Sweden
    Registered: 4/01/2013
    Posts: 810

    Re: The Phoenix Project

    Making slow but steady progress:

    Took the engine out to be able to paint the engine bay.



    Took the rods and the pistons to a machine shop today to have the pistons replaced from cast to forged.


    Put my homemade shifter gizmo and the hydraulic clutch on to the transmission.

     

    9/21/2023 9:43 AM  #127

    Glens 1965 50
    FYI Addict

    Offline

    From: Tomball,Tx
    Registered: 4/01/2013
    Posts: 278

    Re: The Phoenix Project

    Looking good Kemosabe.

     

    9/21/2023 5:13 PM  #128

    Ron68
    Senior 24-7 FYI Addict

    Offline

    From: Mukilteo, Washington
    Registered: 4/01/2013
    Posts: 1,510

    Re: The Phoenix Project

     When done, the Phoenix project needs to be in an art museum instead of on the road. It is that nice.

    68 coupe - 351W, 4R70W, 9" 3.25 -- 65 convertible - 289 4v, C4, 8" 3.00
     

    9/21/2023 6:45 PM  #129

    rpm
    Senior 24-7 FYI Addict

    Online!

    From: Bakersfield, Ca
    Registered: 9/17/2013
    Posts: 3,558

    Re: The Phoenix Project

    Looking good Hakan.

    Bob. 69 Mach 1, 393W, SMOD Toploader, Armstrong  steering, factory AC.
     

    9/25/2023 5:59 AM  #130

    Hakan
    FYI FORD Moderator

    Offline

    From: Långrör, Sandarne, Sweden
    Registered: 4/01/2013
    Posts: 810

    Re: The Phoenix Project

    Thanks Glen, Ron and Bearing Bob!

    Made the final(?) assembly of the left side front suspension yesterday.




    It was almost like I didn't want to put the front wheel back on as it's gonna hide all this that I put hours and hours into.

       •Thread Starter
     

    10/03/2023 8:01 AM  #131

    Hakan
    FYI FORD Moderator

    Offline

    From: Långrör, Sandarne, Sweden
    Registered: 4/01/2013
    Posts: 810

    Re: The Phoenix Project

    Forged pistons are in:


    And my old faithful rubber mallet that I had for years finally gave up. The accident was unrelated to the pistons installment thankfully.


    ​Also painted the headers and the rest of the exhaust system with some German brand paint supposed to be able to handle 800 degree Celsius = 1472 degree Fahrenheit:

    Last edited by Hakan (10/03/2023 8:10 AM)

       •Thread Starter
     

    10/03/2023 3:17 PM  #132

    Glens 1965 50
    FYI Addict

    Offline

    From: Tomball,Tx
    Registered: 4/01/2013
    Posts: 278

    Re: The Phoenix Project

    That baby is looking GOOD!

     

    10/18/2023 4:09 PM  #133

    Nos681
    Senior 24-7 FYI Addict

    Offline

    From: Atlantic Mine, Michigan
    Registered: 7/14/2016
    Posts: 3,293

    Re: The Phoenix Project

    Drooling…looks awesome!

     

    10/23/2023 3:18 PM  #134

    Hakan
    FYI FORD Moderator

    Offline

    From: Långrör, Sandarne, Sweden
    Registered: 4/01/2013
    Posts: 810

    Re: The Phoenix Project

    Had to order new pushrods from the US that's not arrived yet, but meanwhile I had some time to detail the engine. That round thingie in the foreground on the left side header is where the wastegate is gonna be.

       •Thread Starter
     

    11/01/2023 10:21 PM  #135

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,125

    Re: The Phoenix Project

    Does it have a bolt-in core support?

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

    11/02/2023 8:52 AM  #136

    Hakan
    FYI FORD Moderator

    Offline

    From: Långrör, Sandarne, Sweden
    Registered: 4/01/2013
    Posts: 810

    Re: The Phoenix Project

    MS wrote:

    Does it have a bolt-in core support?

    Yes it has. I also reinforced the firewall and made the top of the inner fenders of thicker than original material together with connecting the a-pillars to the shock towers and the export brace that all together hopefully will make the whole engine bay less flexible than original.
     

       •Thread Starter
     

    11/06/2023 5:38 PM  #137

    Hakan
    FYI FORD Moderator

    Offline

    From: Långrör, Sandarne, Sweden
    Registered: 4/01/2013
    Posts: 810

    Re: The Phoenix Project

    Testfitting almost everything before it's time to put the engine back into the car. Only problem I ran into was the clearance between one spark plug boot and the driver's side header which I'll fix tomorrow.





       •Thread Starter
     

    11/06/2023 5:44 PM  #138

    Glens 1965 50
    FYI Addict

    Offline

    From: Tomball,Tx
    Registered: 4/01/2013
    Posts: 278

    Re: The Phoenix Project

    WOW!  You never cease to amaze me.  Excellent work.

     

    11/07/2023 7:03 AM  #139

    rpm
    Senior 24-7 FYI Addict

    Online!

    From: Bakersfield, Ca
    Registered: 9/17/2013
    Posts: 3,558

    Re: The Phoenix Project

    Bee you tea full.

    Bob. 69 Mach 1, 393W, SMOD Toploader, Armstrong  steering, factory AC.
     

    4/01/2024 12:37 PM  #140

    Hakan
    FYI FORD Moderator

    Offline

    From: Långrör, Sandarne, Sweden
    Registered: 4/01/2013
    Posts: 810

    Re: The Phoenix Project

    Here's the latest, slow but steady progress:


       •Thread Starter
     

     

    1 … 4 5 6  Jump to

  • Index
  •  » Show Your Mustang Pictures and History
  •  »  The Phoenix Project

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.