FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » Throttle return springs on 3x2 Holley setup ?

    • 1 of 1

       

    1/19/2024 2:13 PM  #1

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,189

    Throttle return springs on 3x2 Holley setup ?

    Anybody know how/where they originally attached return springs on the end carbs?  I know how I CAN do it, but prefer to match originality if possible.  Pics in manuals do not show any. There are torsion springs on the butterfly shafts but seems like there should be something else.

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

    1/21/2024 11:03 AM  #2

    BobE
    Senior 24-7 FYI Addict

    Offline

    From: White Plains, NY
    Registered: 4/04/2013
    Posts: 2,598

    Re: Throttle return springs on 3x2 Holley setup ?

    I don't have the answer, but maybe try contacting Bob Perkins, or Tony Branda's place of business. 

    65 Fastback, 351W, 5-speed, 4 wheel discs, 9" rear,  R&C Front End.
     

    1/21/2024 5:07 PM  #3

    6sally6
    Hyper FYIFORD ADDICT

    Offline

    From: Surfside Beach,SC
    Registered: 4/02/2013
    Posts: 6,787

    Re: Throttle return springs on 3x2 Holley setup ?

    'Another' time we need Al Newman for some help, huh?!
    6s6

    Get busy Liv'in or get busy Die'n....Host of the 2020 Bash at the Beach/The only Bash that got cancelled  )8
     

    1/21/2024 7:14 PM  #4

    Rudi
    Senior 24-7 FYI Addict

    Offline

    From: Stuck in the 50's Welland Ca
    Registered: 4/01/2013
    Posts: 3,949

    Re: Throttle return springs on 3x2 Holley setup ?

    I’d bet “Woodchuck” on VMF has the answer, the guy is a walking encyclopedia on so many technical questions.

    Good work ain't cheap, Cheap work ain't good!   Simple Man
     

    1/21/2024 7:16 PM  #5

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,189

    Re: Throttle return springs on 3x2 Holley setup ?

    I thought we had our own…

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
       •Thread Starter
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  Throttle return springs on 3x2 Holley setup ?

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.