FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » who is running 16 inch wheels on their 65-66 mustang?

    • 1 of 1

       

    8/14/2024 2:43 AM  #1

    BILLY WALTON from GEORGIA
    Carrollton, GA Bash Host

    Offline

    From: CARROLLTON GEORGIA
    Registered: 4/14/2013
    Posts: 2,431

    who is running 16 inch wheels on their 65-66 mustang?

    let me hear about your wheel size and tire size.

    Its really me....I fixed my caps lock .
     

    8/14/2024 6:36 AM  #2

    RTM
    Senior 24-7 FYI Addict

    Offline

    From: Cape Coral FL
    Registered: 5/22/2019
    Posts: 1,638

    Re: who is running 16 inch wheels on their 65-66 mustang?

    I think the 17’s I put on mine have a nice balance of tire sidewall and rim.  My sizes won’t help because of all my mods. 


     

    8/14/2024 1:25 PM  #3

    lowercasesteve
    Senior 24-7 FYI Addict

    Offline

    From: Auburn, Ca
    Registered: 4/01/2013
    Posts: 1,252

    Re: who is running 16 inch wheels on their 65-66 mustang?

    I have 16x7 steel wheels on my '66. 
    4.25 B/S 
    225-60x16 rear, 
    215-60x16 front.. 

    The reason for the 215's in front is that 225's rubbed the wheel wells even though the edges are rolled.  

    I prefer the look of 16's over that of 17's.   The proportions are better in my eyes.

    My front end is lower than most.  1" lower GT springs. Arning drop.   Distance wheel center to fender is 12".

    Original owner - 351w,T-5, 4whl disks, power R&P
     

    8/14/2024 1:40 PM  #4

    Nos681
    Senior 24-7 FYI Addict

    Offline

    From: Atlantic Mine, Michigan
    Registered: 7/14/2016
    Posts: 3,318

    Re: who is running 16 inch wheels on their 65-66 mustang?

    Dang, that is low.

    Have a picture of it?

     

    8/14/2024 1:46 PM  #5

    lowercasesteve
    Senior 24-7 FYI Addict

    Offline

    From: Auburn, Ca
    Registered: 4/01/2013
    Posts: 1,252

    Re: who is running 16 inch wheels on their 65-66 mustang?

    Original owner - 351w,T-5, 4whl disks, power R&P
     

    8/15/2024 12:41 AM  #6

    BILLY WALTON from GEORGIA
    Carrollton, GA Bash Host

    Offline

    From: CARROLLTON GEORGIA
    Registered: 4/14/2013
    Posts: 2,431

    Re: who is running 16 inch wheels on their 65-66 mustang?

    lowercasesteve wrote:

    Does it rub at all?
    What brakes do you have front and rear?
    What wheels are those where did you get them?
     

    Its really me....I fixed my caps lock .
       •Thread Starter
     

    8/15/2024 7:28 PM  #7

    lowercasesteve
    Senior 24-7 FYI Addict

    Offline

    From: Auburn, Ca
    Registered: 4/01/2013
    Posts: 1,252

    Re: who is running 16 inch wheels on their 65-66 mustang?

    BILLY WALTON from GEORGIA wrote:

    lowercasesteve wrote:

    Does it rub at all?
    What brakes do you have front and rear?
    What wheels are those where did you get them?
     

    Brakes are manual
    12.19" Wilwoods in front
    11" SSBC rears - same as Mustang SVO's and Thunderbirds of that era.
    The car still rubs on sharp right turns, but not badly enough to do anything about.  I can live with it.

    Wheels are NOS style steel from a Stockton Wheel, but you can get them from any wheel maker.

     

    Original owner - 351w,T-5, 4whl disks, power R&P
     

    8/18/2024 7:29 PM  #8

    BILLY WALTON from GEORGIA
    Carrollton, GA Bash Host

    Offline

    From: CARROLLTON GEORGIA
    Registered: 4/14/2013
    Posts: 2,431

    Re: who is running 16 inch wheels on their 65-66 mustang?

    lowercasesteve wrote:

    BILLY WALTON from GEORGIA wrote:

    lowercasesteve wrote:

    Does it rub at all?
    What brakes do you have front and rear?
    What wheels are those where did you get them?
     

    Brakes are manual
    12.19" Wilwoods in front
    11" SSBC rears - same as Mustang SVO's and Thunderbirds of that era.
    The car still rubs on sharp right turns, but not badly enough to do anything about.  I can live with it.

    Wheels are NOS style steel from a Stockton Wheel, but you can get them from any wheel maker.

     

      I wanna see more pictures of them with more light on them

    Its really me....I fixed my caps lock .
       •Thread Starter
     

    8/19/2024 5:02 PM  #9

    6sally6
    Hyper FYIFORD ADDICT

    Offline

    From: Surfside Beach,SC
    Registered: 4/02/2013
    Posts: 6,767

    Re: who is running 16 inch wheels on their 65-66 mustang?

    Hey BILLY....what size 16" rims & tires did you run on your old Mustang ?
    (It should apply on this one as-well.....I think)
    6sally6

    Get busy Liv'in or get busy Die'n....Host of the 2020 Bash at the Beach/The only Bash that got cancelled  )8
     

    8/19/2024 9:02 PM  #10

    lowercasesteve
    Senior 24-7 FYI Addict

    Offline

    From: Auburn, Ca
    Registered: 4/01/2013
    Posts: 1,252

    Re: who is running 16 inch wheels on their 65-66 mustang?

    BILLY WALTON from GEORGIA wrote:

    lowercasesteve wrote:

    BILLY WALTON from GEORGIA wrote:

    Does it rub at all?
    What brakes do you have front and rear?
    What wheels are those where did you get them?
     

    Brakes are manual
    12.19" Wilwoods in front
    11" SSBC rears - same as Mustang SVO's and Thunderbirds of that era.
    The car still rubs on sharp right turns, but not badly enough to do anything about.  I can live with it.

    Wheels are NOS style steel from a Stockton Wheel, but you can get them from any wheel maker.

     

      I wanna see more pictures of them with more light on them

    Try this.



    Sorry,  The wheels are smoothies.  No one makes an oem steel wheel with a Ford bolt pattern.  I know.  I have looked.  What I wanted was a wheel that takes a dog dish hub cap.

    Last edited by lowercasesteve (8/19/2024 9:10 PM)

    Original owner - 351w,T-5, 4whl disks, power R&P
     

    8/20/2024 6:27 PM  #11

    BILLY WALTON from GEORGIA
    Carrollton, GA Bash Host

    Offline

    From: CARROLLTON GEORGIA
    Registered: 4/14/2013
    Posts: 2,431

    Re: who is running 16 inch wheels on their 65-66 mustang?

    6sally6 wrote:

    Hey BILLY....what size 16" rims & tires did you run on your old Mustang ?
    (It should apply on this one as-well.....I think)
    6sally6

    They are on my car and require a 1.25 inch spacer I wanna put some wheels on without spacers and something different.   I have 2 sets of those wheels ...the ones on my car has a new set of tires on them.
     

    Its really me....I fixed my caps lock .
       •Thread Starter
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  who is running 16 inch wheels on their 65-66 mustang?

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.