FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » Front vent window

    • 1 of 1

       

    8/22/2014 6:09 PM  #1

    wsinsle
    Senior 24-7 FYI Addict

    Offline

    From: Belle Vernon, PA
    Registered: 4/01/2013
    Posts: 1,786

    Front vent window

    Is there a seal or anything that goes between the front triangle vent window and door or does it just slide in there and bolt in. I bought this car in prices and everything is a puzzle putting it back together. Seems to me there should be some kind of seal. If so a part number or something would help. Thanks!

    If this forum can't fix it, it isn't broke.
     

    8/22/2014 6:27 PM  #2

    Derek
    I FYI 24-7

    Offline

    From: Eatonton GA
    Registered: 4/01/2013
    Posts: 549

    Re: Front vent window

    It helps if you tell us what year and body style. However 64-68 had a channel that presses into the vent frame ,which seperates the door glass from the vent window. Here's ah link to a exploded view pic..http://www.mustangandfords.com/how-to/paint-body/mump-0108-weatherstripping-window-channels-seals/

    It's hard to type "funny"
     

    8/23/2014 5:50 AM  #3

    wsinsle
    Senior 24-7 FYI Addict

    Offline

    From: Belle Vernon, PA
    Registered: 4/01/2013
    Posts: 1,786

    Re: Front vent window

    Sorry 66 coupe, I was talking between the vent window frame and the door. Does seal go the to stop water from getting down in the door. There is a lot of information on that link that will help. Thanks.

    If this forum can't fix it, it isn't broke.
       •Thread Starter
     

    8/23/2014 8:35 AM  #4

    Rudi
    Senior 24-7 FYI Addict

    Offline

    From: Stuck in the 50's Welland Ca
    Registered: 4/01/2013
    Posts: 4,071

    Re: Front vent window

     
    This is the one I used.
    Outer lower vent weatherstrip. Part No. HW 1098. $6.98. Page 54 ,CJ Pony Parts.

     The above post Ford part # is not very clear could be 222A80

    Last edited by Rudi (8/23/2014 8:37 AM)

    Good work ain't cheap, Cheap work ain't good!   Simple Man
     

    8/23/2014 4:53 PM  #5

    Mochaman
    Senior 24-7 FYI Addict

    Offline

    From: Royse City, Texas
    Registered: 4/02/2013
    Posts: 1,515

    Re: Front vent window

    These are the instructions I followed when I rebuilt mine.
    http://www.mustangandfords.com/how-to/interior-electrical/mump-0703-classic-mustang-vent-window/

     

     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  Front vent window

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.