| ||
Visit MustangSteve's web site to view some of my work and find details for: FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events |
Offline
Can I purge the system with astringent alcohol or do I need to replace the cups, etc before adding dot 5?
thanks
Offline
MWM wrote:
Can I purge the system with astringent alcohol or do I need to replace the cups, etc before adding dot 5?
thanks
Poop Boys(and others) sell a brake flush. Just use that.
6sal6
Offline
Thanks 6sal6,
currently everything is off the car, will bleed the front disc brakes.
thanks
Offline
Don;t do it !!! You will eventually regret the DOT 5 silicone stuff.
Offline
Agree with MS, run DOT3 OR DOT4, don't use DOT5. Check this link for a primer and then Google for more info:
Offline
MustangSteve wrote:
Don;t do it !!! You will eventually regret the DOT 5 silicone stuff.
Why is that, MS? I have had Dot 5 in my '65 convertible, with front discs and rear drums, since 1982. Nary a problem and no fluid that will suck moisture out of the air and rust calipers and wheel cylinders.
Also I do not get the 'spongyness' that I have heard is supposed to be one of the symptoms of using it.
Offline
I also disagree that you will regret using DOT 5.
DOT 5 has been in my 68 with four wheel disk brakes for about four years and can vouch there is no sponge feeling or reduction in stopping force.
The only reason not using DOT 5 is if you are racing where the lower numbers are required.
Offline
Darn! I thought driving my Fastback was racing, the Cobra rotors keep turning blue! Ain't no DOT 5 in there! It is great in hydraulic clutches though!
REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on. |