I sent you a PM. I'll take your bellhousing. 

Where are you located ?

I have one, perhaps two more t5's I can put together.

The first is a nice low mile 01 v6 unit...has the stronger 91-04 gears in it.

I can set it up a few different ways...the first is with the longer input shaft so that you can use a 94/95 bell, and the second is with a shorter 85-93 fox input shaft.  I'll subtract $50 from the price if you go with the longer input shaft, as I'm out of the shorter ones and will have to buy one if that's how you want it set up.  I can also set it up as a used/inspected unit...here I tear it all the way down, inspect all bearings and syncros and gears, replace just what's worn, and slap it back together.  This is assuming I have enough spare parts to do this.  If this is possible, price is around $400 plus ship.  I can also sell it as a fully rebuilt unit, all new syncros, small parts, bearings etc,...for around $200 more...prices are subject to change slightly...but that's what I hope to be able to do this for.

No core charge.  I have a fox bell housing I can sell, but I'll only sell it as part of a package deal with a t5...

Shipping I believe is around $100

I have a second box coming in this week...I'll have to inspect it, but if it's rebuildable, and not too far gone, I'll be able to piece it together and sell here also.

Thought I had a line on one but it fell through, so if you check this thread, i'm still looking.

I don't really have much of anything that I could assemble complete...

I've got maybe a few cases, some third gears, sliders, and a few other odds and ends, but not sure if the price of assembly would be worth it or not for you.  If you're looking to build up a t5z, that may be possible, as all we'd need is the case, sliders, and mainshaft.