FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

8/11/2016 4:23 PM  #1


American racing torque thrus II wheels 17x8

I have a set of 17x8 American Racing Torque thrust II wheels for sale.  They are 17x8 with 4.75" backspacing to fit early fords.   Have Falken 452 hp tires in 245 45 17. Tires have about 1,000 miles on them.

One wheel may have an issue with where the tire seats to it.  Tire went down and took it to Tire Kingdom and it wouldn't seat so they replaced tire with a new one and it seated fine.  Now noticed while the tire is holding air it seems to have a slight bulge in that area.  This tire has less than 100 miles on it.

Worse case is you need to replace the one wheel. You might be able to get tire removed from wheel and remounted.  There is no damage or anything to outside of the wheel.

Asking $875, Really don't want to ship.  Located in North Fl, Jacksonville

 

8/11/2016 8:35 PM  #2


Re: American racing torque thrus II wheels 17x8

Can you post some pictures?


John  -- 67 Mustang Coupe 390 5 speed
 

8/12/2016 9:30 AM  #3


Re: American racing torque thrus II wheels 17x8

Yes I can get some current pics up this afternoon. 

I'm hoping to not have to ship. Where are you

located ? 

     Thread Starter
 

8/13/2016 7:47 PM  #4


Re: American racing torque thrus II wheels 17x8

I'm in Houston. I work well with pictures, thanks for posting. I always pictured my car with the gray centers, hadn't really thought about all chrome.

What brakes are you running? With 245/45 tires all around, has there been issues with rubbing? Are the lips of the fenders and quarters rolled?


John  -- 67 Mustang Coupe 390 5 speed
 

8/14/2016 9:52 AM  #5


Re: American racing torque thrus II wheels 17x8

On the 67 I haven't had any issues front or rear with the 245 45 17's.  My car also sets fairly low with the Shelby drop in the front with 1" 620lb lowering springs and the rear has Eaton lowering leafs in the back.

I have baer track 13" brakes on the front and SSBC rear disc.  The rear disc they sell was based on the early Mustang SVO and the Thunderbird turbo coupe.


 

     Thread Starter
 

8/16/2016 2:01 PM  #6


Re: American racing torque thrus II wheels 17x8

Thanks for the info.


John  -- 67 Mustang Coupe 390 5 speed
 

1/06/2017 3:23 PM  #7


Re: American racing torque thrus II wheels 17x8

Do you still have these wheels & tires for sale? I'm located in Miami, FL.

Martin - '65 Mustang Coupe 289 AOD EFI

 

Board footera


REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.