FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

3/05/2017 12:16 AM  #1


Need help finding source to buy a shifter part

66 Automatic transmission.  At the very top of the shifter lever, there is a white plastic piece that is attached to the end of the cable.  The button on the side of the shifter handle moves that plastic piece causing it to pivot and pull up on the cable.

I have a shifter that the plastic piece broke in half.  I do not know what it looks like (in one piece) nor do I know what it is called.  I have never had one come apart before.  I have searched my usual sources to no avail. 

Has anyone ever had any experience replacing that part or know where to get one?  You would think they would make them to last more than 50 years!!!


Money you enjoy wasting is NOT wasted money... unless your wife finds out.
 

3/05/2017 9:36 AM  #2


Re: Need help finding source to buy a shifter part

NPD sells the A/T shift lever cable #7D246-1. It comes complete with the white plastic piece I believe you're referring to.
Mustang CABLE, A/T SHIFT LEVER | 7D246-1 | NPD

Last edited by rhutt (3/05/2017 10:28 AM)


'66 GT Fastback, 302, Edelbrock top end, Sniper EFI, MSD, JBA Headers & Exhaust, T-5Z, Currie 3.55 Trac-Loc
 

3/05/2017 10:37 AM  #3


Re: Need help finding source to buy a shifter part

on my stock 66 it looks different. the cable is attached to a steel piece with a roller that is pushed by the button. the plastic piece acts as a guide with a cam that rides up and down with the cable.


You can lead a horse to water, but you can't get him drunk
 

3/05/2017 3:51 PM  #4


Re: Need help finding source to buy a shifter part

rhutt wrote:

NPD sells the A/T shift lever cable #7D246-1. It comes complete with the white plastic piece I believe you're referring to.
Mustang CABLE, A/T SHIFT LEVER | 7D246-1 | NPD

 
That plastic piece is not the one I need. I need the one that is cam-shaped.


Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     Thread Starter
 

3/05/2017 5:13 PM  #5


Re: Need help finding source to buy a shifter part

I found an image of the shift lever online. Is the part you need the one I circled in blue? If so, you may have to order a replacement lever. I couldn't find just that part although it may come as part of a rebuild kit.


'66 GT Fastback, 302, Edelbrock top end, Sniper EFI, MSD, JBA Headers & Exhaust, T-5Z, Currie 3.55 Trac-Loc
 

3/05/2017 5:58 PM  #6


Re: Need help finding source to buy a shifter part

According to the Ford shop manual, that plastic piece does not have its own part number. It is part of the shifter handle assembly. I did some parts searching and found nothing. Looks like your choices are to buy a repro handle with the plastic ramp and new cable for $90, or find a used shifter handle, or whittle a new plastic ramp out of UHMWPE.

 

3/06/2017 9:43 AM  #7


Re: Need help finding source to buy a shifter part

Steve,

Here is a photo of the shifter from my 66, if it will help it is yours for the shipping charge.

Last edited by Dkralc (3/06/2017 9:43 AM)


www.quadmat.com  Butyl Sound Deadener & Insulation
 

3/06/2017 9:00 PM  #8


Re: Need help finding source to buy a shifter part

Thanks.  I will gladly pay shipping cost!
PM sent.


Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     Thread Starter
 

3/06/2017 9:15 PM  #9


Re: Need help finding source to buy a shifter part

I want to thank MS for posting his problem. I did not know how the shift detent pawl actuation worked before this thread. Never worked on one. Now I know more than I did before.

 

Board footera


REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.