FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » Water Pump Pulley

    • 1 of 1

       

    6/09/2019 11:03 AM  #1

    Vicfonz
    FYI Addict

    Offline

    From: Southern California
    Registered: 3/21/2018
    Posts: 239

    Water Pump Pulley

    hi yalls..so ive been looking for a water pump pulley for a while...not just any old one..my set up is 6 rib serpentine..but im running 2..1 belt runs from power steering to crank to water pump..other side is just crank to alternator .. I would like to double up on that water pump pulley so I can attach my alt off of it as well..i found 1 pulley but it has a small gap inbetween the 2.i think its for a 6 cyclinder mustang about 83... but yea doesn't match up.i need them directly side by side no space in between to match exactly how my crank pulley is any ideas?..i have an early 80s model 5.0 in the car now..

    "If Someone Did it on Youtube...So Can I...Well.....Unless its Heart Surgery,Thats Kinda Hard"
     

    6/09/2019 6:07 PM  #2

    6sally6
    Hyper FYIFORD ADDICT

    Offline

    From: Surfside Beach,SC
    Registered: 4/02/2013
    Posts: 6,872

    Re: Water Pump Pulley

    Hope you get it sorted out soon!..........need to leave for the bash in about a week. 
    You ARE driving to the MSBB?? in Michigan....right?!
    6sally6
    I'm flying butt-steel............I'ma go'in.

    Get busy Liv'in or get busy Die'n....Host of the 2020 Bash at the Beach/The only Bash that got cancelled  )8
     

    6/09/2019 6:52 PM  #3

    rpm
    Senior 24-7 FYI Addict

    Offline

    From: Bakersfield, Ca
    Registered: 9/17/2013
    Posts: 3,671

    Re: Water Pump Pulley

    6sally6 wrote:

    Hope you get it sorted out soon!..........need to leave for the bash in about a week. 
    You ARE driving to the MSBB?? in Michigan....right?!
    6sally6
    I'm flying butt-steel............I'ma go'in.

    You are good Mike. Is your technique considered a leading question, child psychology, or both?
     

    Bob. 69 Mach 1, 393W, SMOD Toploader, Armstrong  steering, factory AC.
     

    6/15/2019 7:07 AM  #4

    mustangermike
    Administrator

    Offline

    From: Cleburne
    Registered: 4/13/2017
    Posts: 204

    Re: Water Pump Pulley

    Vicfonz, is there a standoff between the two pulleys?  Maybe it's something that could possibly be machined on a lathe?

    Owner of MustangSteve - 1967 Mustang Coupe 302, 2005 Mustang GT
     

    6/15/2019 9:10 AM  #5

    TKOPerformance
    Hyper FYIFORD ADDICT

    Offline

    From: Newark, DE
    Registered: 12/15/2014
    Posts: 7,522

    Re: Water Pump Pulley

    Is it a standard or reverse rotation water pump?  RR pumps used a smooth pulley, because it ran off the back of the belt; not the ribbed side.  A picture would be super helpful.  I have a milk crate full of Ford pulleys and might have what you need, but its hard to visualize...

     

    6/15/2019 3:11 PM  #6

    Muzz 66
    I FYI 24-7

    Offline

    From: Madera, California
    Registered: 4/01/2013
    Posts: 416

    Re: Water Pump Pulley

    So, if I’m picturing this correctly, you have a double crank pulley, a standard rotation clockwise water pump, and you need a double water pump pulley to match the crank pulley?
    I’m also picturing very little room between your fan and radiator.

    '66 Fastback since July 27, 1981. Springtime Yellow, originally a 200 cu in, 4 speed. Also a '92 LX Coupe, 5.0, 5 speed.
     

    6/27/2019 9:06 PM  #7

    Vicfonz
    FYI Addict

    Offline

    From: Southern California
    Registered: 3/21/2018
    Posts: 239

    Re: Water Pump Pulley

    yes you got that right..there is room for the pulley I just have to find the right one

    Muzz 66 wrote:

    So, if I’m picturing this correctly, you have a double crank pulley, a standard rotation clockwise water pump, and you need a double water pump pulley to match the crank pulley?
    I’m also picturing very little room between your fan and radiator.

     

    "If Someone Did it on Youtube...So Can I...Well.....Unless its Heart Surgery,Thats Kinda Hard"
       •Thread Starter
     

    6/27/2019 9:07 PM  #8

    Vicfonz
    FYI Addict

    Offline

    From: Southern California
    Registered: 3/21/2018
    Posts: 239

    Re: Water Pump Pulley

    ive been so busy(obviously since I last posted this lo)...I will try to post a picture hopefully this weekend

    TKOPerformance wrote:

    Is it a standard or reverse rotation water pump?  RR pumps used a smooth pulley, because it ran off the back of the belt; not the ribbed side.  A picture would be super helpful.  I have a milk crate full of Ford pulleys and might have what you need, but its hard to visualize...

     

    "If Someone Did it on Youtube...So Can I...Well.....Unless its Heart Surgery,Thats Kinda Hard"
       •Thread Starter
     

    6/27/2019 9:08 PM  #9

    Vicfonz
    FYI Addict

    Offline

    From: Southern California
    Registered: 3/21/2018
    Posts: 239

    Re: Water Pump Pulley

    I guess its a standoff if im understanding you correctly...I will try to get a picture up soon so everyone understands what I mean

    mustangermike wrote:

    Vicfonz, is there a standoff between the two pulleys?  Maybe it's something that could possibly be machined on a lathe?

     

    "If Someone Did it on Youtube...So Can I...Well.....Unless its Heart Surgery,Thats Kinda Hard"
       •Thread Starter
     

    6/27/2019 9:17 PM  #10

    Vicfonz
    FYI Addict

    Offline

    From: Southern California
    Registered: 3/21/2018
    Posts: 239

    Re: Water Pump Pulley

    let me see it this works...heres an old picture I have on the computer..not the best to give you an idea..but you can see the alt  with the belt just going to the crank(bottom pic)both belt are basically side by side on the crank and I was looking to do the same to the water pump..i will try to post a pic of the crank pulley this weekend and more better close ups

    "If Someone Did it on Youtube...So Can I...Well.....Unless its Heart Surgery,Thats Kinda Hard"
       •Thread Starter
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  Water Pump Pulley

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.