| ||
Visit MustangSteve's web site to view some of my work and find details for: FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events |
Offline
Hello everyone,
My trunk light just stopped working so im tracing the wire to see why. Was wondering what the most convenient location would be to pull power for a trunk light. I know there are a few locations. I know it has to be full hot to work. Its a 67 fastback 390 gt. I ran it down the driver side rocker channel to behind the kick panel, and up behind the dash somewhere-was trying to avoid taking the gauge cluster out, it got hot out so i took a break. Where are some good locations?
Thanx
Offline
What about the door switch for the dome light? Should be able to pickup a constant hot there.
Offline
No dome light, upper and lower consoles.
Anything on the back of the ignition switch or cigarette lighter?
Offline
Are there lights in your consoles that come on when you open doors? If so, as Bolted suggested...use constant 12v at door jamb switch.
Do you have an amplifier for stereo in trunk? Could tap 12v from there. Just make sure to install an in-line fuse.
Last edited by Nos681 (8/09/2019 6:27 AM)
REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on. |