FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

8/15/2019 8:20 PM  #1


A arm stop tool .. can I borrow it ? :)

Anyone got an A arm stop tool for the 64 mustang (that’ll work with a Shelby drop) ?

Let me borrow it please .. Esp in the dfw area or I’ll pay shipping ..

I want to change out my lower control arms , and I don’t want to take apart of the UCA abs springs ..

Let me know


If it aint broke, I have'nt tried to "Fix" it yet!
 

8/16/2019 5:51 AM  #2


Re: A arm stop tool .. can I borrow it ? :)

Your shock will be your stop tool. I have done this job. You don't need any special tool, just leave the shock in place. It controls the travel of the suspension.


Good, fast or cheap. Pick any two...
 

8/17/2019 4:30 PM  #3


Re: A arm stop tool .. can I borrow it ? :)

A chain would work as well.

Way back when I tried using the shock as the suspension stop and things did not turn out well. The pressure of the springs caused the bottom mount on the shock to break off. Scared the crap out of me when it let go. I was not near the car when it happened. 


Gary Zilik - Pine Junction, Colorado - 67 Coupe, 289-4V, T5
 

8/17/2019 5:50 PM  #4


Re: A arm stop tool .. can I borrow it ? :)

A couple of 1” spacers under the top shock mount works quite well.


Good work ain't cheap, Cheap work ain't good!   Simple Man
 

Board footera


REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.