FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » Dynomax VT Review

    • 1 of 1

       

    8/27/2013 10:13 AM  #1

    MWM
    I FYI 24-7

    Offline

    Registered: 4/01/2013
    Posts: 423

    Dynomax VT Review

    Hello,
    I would to hear from those that have installed and are using the Dynomax VT on their classic mustang. After the fact, what are your thoughts and feedback? The good, bad or ugly?
    thank you,
    William

     

    8/27/2013 12:45 PM  #2

    midnite
    FYI FORD Member

    Offline

    Registered: 4/10/2013
    Posts: 34

    Re: Dynomax VT Review

    there is a guy (MFE) on corral.net who uses them on a fox 5.0 and really likes them. I have been thinking of switching to them

     

    8/27/2013 2:57 PM  #3

    Don
    Senior 24-7 FYI Addict

    Offline

    From: Coppell, Texas
    Registered: 4/02/2013
    Posts: 1,220

    Re: Dynomax VT Review

    I have them,, had turbo muffler, then stock type mufflers,  Now the VT.  almost all the drone is gone, now just hear normal wind noises,  My set up is a fastback with slightly modded 302 , shorty headman headers. stock duel GT pipe set up with cross over h-pipe.  I have a five speed tran with 3:55 gears.  RPM at 60 -70 is in the 2000-2400 range ,,    

     

     

    8/27/2013 8:41 PM  #4

    Alan
    I FYI 24-7

    Offline

    From: Axtell KS
    Registered: 4/03/2013
    Posts: 514

    Re: Dynomax VT Review

    I don't have those, but have Heartthrob Velocity series. I am running 4.33 gears  with a mild built 302, long tube ceramic coated headers. Down the hiway I am runnig about 2600 to 2700 rpm at 65 mph. All I hear is wind noise and just a little bit of exhaust.  No drone to speak of at all.  They sound really throaty when I put my foot in it and I get alot of compliments on how it sounds.
    http://www.heartthrobexhaust.com/heartthrobvelocityseriesmufflers.html

    Last edited by Alan (8/27/2013 8:42 PM)

    67 Coupe, 5.0 EEC IV Fuel injected. T5, 3:70 rear
     

    8/29/2013 7:11 AM  #5

    MWM
    I FYI 24-7

    Offline

    Registered: 4/01/2013
    Posts: 423

    Re: Dynomax VT Review

    Thank you everyone for your replies! I am a few months out from replacing the exhaust so any input is appreciated. Also, I will follow up with MS after the bash for more feedback. 
    Thank you!

       •Thread Starter
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  Dynomax VT Review

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.