FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » Reusable parts? 65 Falcon in-line 6

    • 1 of 1

       

    1/24/2020 10:13 AM  #1

    65Bluebird
    Active Member

    Offline

    Registered: 1/22/2020
    Posts: 1

    Reusable parts? 65 Falcon in-line 6

    Hi all. Had a few questions that are Falcon related but was told this was the place to come and ask.

    Looking to do the 302 conversion and want to tackle the steering and suspension up front first. I’ve already been looking and pricing out the steering linkage and know what I need.

    As far as upper and lower arms go what is the difference between V8 and 6? Are the components just beefier or would my stock 6 ones work (would replace ball joints and shaft on uppers)? Also how could I tell the difference between a V8 control arm by just looking at it? I picked up a 65 8” rear and the guy gave me upper and lower arms from a v8, but they look fairly identical to the ones on my car now. I also received v8 coil springs from him but don’t know how I’m suppose to identify if they really are.

    Last edited by 65Bluebird (1/24/2020 10:17 AM)

     

    1/24/2020 9:34 PM  #2

    Nos681
    Senior 24-7 FYI Addict

    Offline

    From: Atlantic Mine, Michigan
    Registered: 7/14/2016
    Posts: 3,337

    Re: Reusable parts? 65 Falcon in-line 6

    I’m not experienced with actual hands on working on Falcons.  Another one of my favorites though.

    I looked on Rock Auto and did comparisons between 65 Falcon  170ci and 289 ci control arms. 65 mustang with 289ci uses same control arm as well.  Shows same part numbers.

    I looked at Moog upper control arms only. (Same-Same comparisons).

     

    1/24/2020 9:46 PM  #3

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,282

    Re: Reusable parts? 65 Falcon in-line 6

    Same arms. Only steering linkage is different.

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  Reusable parts? 65 Falcon in-line 6

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.