| ||
Visit MustangSteve's web site to view some of my work and find details for: FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events |
Offline
So I'm under the car stuffing the speedo cable back into the tranny and I see this; A crushed fuel line.
I also see a couple of pinholes in the exhaust welds. The wonders of welding upside down.
I think I noticed the crushed fuel line many moons ago and she runs great so I'm going to leave it for now. The pinholes I plan to weld up ASAP.
Last edited by RV6 (3/16/2020 6:03 PM)
Offline
Fuggidabowddit...........unless you plan on "park'in" with your babe and need the motor running to keep warm...(which kinda defeats the reason for "park'in")
I bought some of this......"stuff" that you rub on leaky exhaust and it seals it up.
It sorta works. Prolly be OK for pin holed welds.
6sal6
Offline
A little red hi-temp sillycone.
Offline
I would simply weld those up rather than attempt some bs patch in a tube that will prove temporary at best. Welding is easy and forever.
Before you try to weld it, wire-brush it clean so the weld will be all metal.
Offline
MS wrote:
I would simply weld those up rather than attempt some bs patch in a tube that will prove temporary at best. Welding is easy and forever.
Before you try to weld it, wire-brush it clean so the weld will be all metal.
Since I canna go nowhere tomorrows project is to dust of the ole welder.
Offline
You’re not old Gary.
You’re seasoned.😁
REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on. |