FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » mustang front drum brake hubs stud?

    • 1 of 1

       

    7/23/2020 5:26 PM  #1

    GT350
    FYI Addict

    Offline

    From: scotland u.k
    Registered: 4/01/2013
    Posts: 277

    mustang front drum brake hubs stud?

    mustang front drum brake hubs  stud? i have just converted to a mustang steve cobra brake conversion on from 68 mustang  does anyone know the knurl size of the studs as i need longer ones for my foose alloys/thanks javed

     

    7/23/2020 8:04 PM  #2

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,268

    Re: mustang front drum brake hubs stud?

    Dorman 610-338 or 610-441 are good ones to use.  As I recall, they have 0.623 knurl diameter.

    338’s are available on www.mustangsteve.com

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

    7/24/2020 2:18 PM  #3

    RTM
    Senior 24-7 FYI Addict

    Offline

    From: Cape Coral FL
    Registered: 5/22/2019
    Posts: 1,730

    Re: mustang front drum brake hubs stud?

    Good to know.  I will need to make sure I order those as well when I order the brake brackets and other parts I need.  

     

    7/24/2020 2:32 PM  #4

    BobE
    Senior 24-7 FYI Addict

    Offline

    From: White Plains, NY
    Registered: 4/04/2013
    Posts: 2,655

    Re: mustang front drum brake hubs stud?

    MS wrote:

    Dorman 610-338 or 610-441 are good ones to use. As I recall, they have 0.623 knurl diameter.

    338’s are available on www.mustangsteve.com

    I used the 441's, they are 2.125" long.  I have disc brakes and Torq-Thrust wheels and the stud length is fine.  With drum brakes and different wheels, I suggest making sure the length doesn't bottom out in the lug nut before it is properly tightened.
     

    65 Fastback, 351W, 5-speed, 4 wheel discs, 9" rear,  R&C Front End.
     

    7/27/2020 7:54 AM  #5

    mustangermike
    Administrator

    Offline

    From: Cleburne
    Registered: 4/13/2017
    Posts: 204

    Re: mustang front drum brake hubs stud?

    I sell the 2-3/16″ long studs with the .623" knurl.  And BobE is right, make sure the lug nut has room to properly be torqued down.

    Owner of MustangSteve - 1967 Mustang Coupe 302, 2005 Mustang GT
     

    7/27/2020 1:20 PM  #6

    GT350
    FYI Addict

    Offline

    From: scotland u.k
    Registered: 4/01/2013
    Posts: 277

    Re: mustang front drum brake hubs stud?

    thanks guys

       •Thread Starter
     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  mustang front drum brake hubs stud?

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.