| ||
Visit MustangSteve's web site to view some of my work and find details for: FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events |
Offline
My how things change over the years.
Putting aluminum intake on 5.0 with 302(D5) heads. Ordered a set of intake gaskets and was sent fel pro 90116 (289/302 hi performance). Looked a lot like old 351 gaskets, but was not sure.
They leaked. Just like old 351 gaskets incorrectly used on 289/302/5.0.
Re-ordered fel pro 90103, the number I was familiar with from the past. They leaked, also, but it was due to one gasgket dropping down (my bad).
Reordered and was told 90103 was obsolete number, having been replaced by fel pro 90361. These gaskets look identical to 90103, but the package says they fit 302 and 351. Can the 302 gaskets be used on 351, when the 351 gaskets cannot be used on 302? Time has moved on but I apparently have not. Help, please.
Best,
Old Al Newman
Offline
Can't help with intake jazz-tex info butt (TS&T) it's good to see your voice again.
BB1
Offline
They will fit later 351 that does not have the dogleg port.
Good to see you back!!!
Offline
Welcome back Al! Good to know you're still around.
Coincidentally, before I saw your post I was thinking of one of your best phrases about "the fuel economy of a V8 and the performance of a 6-cylinder" after putting a 250 I-6 in mine. But maybe the fuel economy will improve - I'm only about 250 miles into the new engine break-in period.
Anyway, happy days :-)
Offline
We won't tell'um you was planning on coming to the Bash at the Beach........ A surprise guest!!!
Good to hear your textez again!
6sally6
Offline
HELLO AL
REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on. |