FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

7/31/2020 8:06 AM  #1


Voice from the past

My how things change over the years.
Putting aluminum intake on 5.0 with 302(D5) heads.  Ordered a set of intake gaskets and was sent fel pro 90116 (289/302 hi performance).  Looked a lot like old 351 gaskets, but was not sure.
They leaked.  Just like old 351 gaskets incorrectly used on 289/302/5.0.
Re-ordered fel pro 90103, the number I was familiar with from the past.  They leaked, also, but it was due to one gasgket dropping down (my bad).
Reordered and was told 90103 was obsolete number, having been replaced by fel pro 90361.  These gaskets look identical to 90103, but the package says they fit 302 and 351.  Can the 302 gaskets be used on 351, when the 351 gaskets cannot be used on 302?  Time has moved on but I apparently have not.  Help, please.
Best,
Old Al Newman


Classic cars are full of surprises and almost none of them are good ones!
 

7/31/2020 8:53 AM  #2


Re: Voice from the past

Can't help with intake jazz-tex info butt (TS&T) it's good to see your voice again.

BB1


"you get what you pay for, good work isn't cheap, and there are NO free lunches...PERIOD!"
 

7/31/2020 9:45 AM  #3


Re: Voice from the past

They will fit later 351 that does not have the dogleg port.

Good to see you back!!!


Money you enjoy wasting is NOT wasted money... unless your wife finds out.
 

7/31/2020 1:26 PM  #4


Re: Voice from the past

Welcome back Al!  Good to know you're still around.

Coincidentally, before I saw your post I was thinking of one of your best phrases about "the fuel economy of a V8 and the performance of a 6-cylinder" after putting a 250 I-6 in mine.   But maybe the fuel economy will improve - I'm only about 250 miles into the new engine break-in period. 

Anyway, happy days  :-)


Founding Member of the Perpetually Bewildered Society
 

7/31/2020 7:09 PM  #5


Re: Voice from the past

We won't tell'um you was planning on coming to the Bash at the Beach........ A surprise guest!!!
Good to hear your textez again!
6sally6


Get busy Liv'in or get busy Die'n....Host of the 2020 Bash at the Beach/The only Bash that got cancelled  )8
 

8/01/2020 12:02 AM  #6


Re: Voice from the past

HELLO AL


Its really me....I fixed my caps lock .
 

Board footera


REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.