FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

11/30/2021 7:43 PM  #1


Lt. Dan and other 300-6 cylinder fanz....watch dis!!!!

Like MS sez......."If they just didn't sound so funny.........."
6salr



https://youtu.be/SZoV6E5DDXI?t=9

Last edited by 6sally6 (11/30/2021 7:44 PM)


Get busy Liv'in or get busy Die'n....Host of the 2020 Bash at the Beach/The only Bash that got cancelled  )8
 

11/30/2021 8:11 PM  #2


Re: Lt. Dan and other 300-6 cylinder fanz....watch dis!!!!

Pat fella sure has a lot of pencils in his shirt pocket.


Good work ain't cheap, Cheap work ain't good!   Simple Man
 

11/30/2021 8:58 PM  #3


Re: Lt. Dan and other 300-6 cylinder fanz....watch dis!!!!

Cool…but scary. 😜

 

12/01/2021 2:39 AM  #4


Re: Lt. Dan and other 300-6 cylinder fanz....watch dis!!!!

All that at 4,500 rpm.


Bob. 69 Mach 1, 393W, SMOD Toploader, Armstrong  steering.
 

12/01/2021 10:52 AM  #5


Re: Lt. Dan and other 300-6 cylinder fanz....watch dis!!!!

The pre Turbo numbers looked pretty good, I would like to see the power curve for that combination. It would make a nice cruiser motor for an old F100,and you know the motor is stout and would last a long time if it held up to the Boost.
I know a lot of folks don't like the inlines for different reasons, but I like the sound and the smooth low RPM torque delivery. I would love to build a 65-66 F100 with this motor and a 5-speed as my errand runner.

 

12/07/2021 4:29 PM  #6


Re: Lt. Dan and other 300-6 cylinder fanz....watch dis!!!!

Now, if my 250 pulled 3/4 of those numbers and sounded like that, FOR LESS THAN MY 331 COST, I would be interested.  But, I am not afraid mine is going to blow up every time I floor it.  


Money you enjoy wasting is NOT wasted money... unless your wife finds out.
 

12/07/2021 5:29 PM  #7


Re: Lt. Dan and other 300-6 cylinder fanz....watch dis!!!!

Yeah.........I tink the old six mighta-been right on the ragged edge!!!!
You could kinda tell by the look on those fellas faces.
6sal6


Get busy Liv'in or get busy Die'n....Host of the 2020 Bash at the Beach/The only Bash that got cancelled  )8
     Thread Starter
 

12/11/2021 7:28 AM  #8


Re: Lt. Dan and other 300-6 cylinder fanz....watch dis!!!!

That was impressive.   Would be great to know how long one could live under those conditions.

 

12/11/2021 8:43 AM  #9


Re: Lt. Dan and other 300-6 cylinder fanz....watch dis!!!!

With 7 main bearings, probably for quite a while.

Think there might be a failure elsewhere first…like a piston.

 

12/21/2021 4:54 PM  #10


Re: Lt. Dan and other 300-6 cylinder fanz....watch dis!!!!

Nos681 wrote:

With 7 main bearings, probably for quite a while.

Think there might be a failure elsewhere first…like a piston.

Piston upgrade would be easy if that's all it took to make it last.

 

Board footera


REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.