FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  » COULD this actually work???!

    • 1 of 1

       

    8/05/2022 10:34 AM  #1

    6sally6
    Hyper FYIFORD ADDICT

    Offline

    From: Surfside Beach,SC
    Registered: 4/02/2013
    Posts: 6,852

    COULD this actually work???!

    https://www.jalopyjournal.com/forum/threads/firecracker-to-unstick-a-piston.1271013/

    Would the guy be alive to tell about it??
    It was posted as a serious question butt-it sure made me giggle!!
    Lifes toooo short to be real serious about carz!
    6s6

    Get busy Liv'in or get busy Die'n....Host of the 2020 Bash at the Beach/The only Bash that got cancelled  )8
     

    8/05/2022 12:01 PM  #2

    Rufus68
    I FYI 24-7

    Offline

    From: Knoxville, TN
    Registered: 4/26/2017
    Posts: 889

    Re: COULD this actually work???!

    I think all it would do would be to fill the combustion chamber with stinky confetti.

    1968 T-code Coupe with a 302.  Nice car, no show stopper for sure, but I like it.
     

    8/05/2022 1:15 PM  #3

    Vkt-66
    FYI Addict

    Offline

    From: Bedford, Tx..
    Registered: 7/22/2013
    Posts: 142

    Re: COULD this actually work???!

    THAT was entertaining ...  caught  myself thinking this might work ??  also laughing to tears ..

    66 PonySilverBlue-289/gt40/roller/650cfm/ram air-T-5-cable-w4way.disc/4-245x50x16"
     

    8/05/2022 1:46 PM  #4

    TKOPerformance
    Hyper FYIFORD ADDICT

    Offline

    From: Newark, DE
    Registered: 12/15/2014
    Posts: 7,495

    Re: COULD this actually work???!

    Doubtful it would work.  Sounds like a good way to make a minor problem into a bigger problem.  You want to unstick a stuck piston?  Pour Coke into it and let it sit overnight.  It dissolves all the rust due to the phosphoric acid in it. 

     

    8/05/2022 2:04 PM  #5

    Nos681
    Senior 24-7 FYI Addict

    Offline

    From: Atlantic Mine, Michigan
    Registered: 7/14/2016
    Posts: 3,329

    Re: COULD this actually work???!

    Along those line, we used “bug juice” to clean brass   And bronze…citric acid with flavor and color.

    When I was cleaning the 8” differential housing, I took the axle tag and covered both side with Ketchup and wrapped in small piece of paper towel stored in a ziplock sandwich bag.

    Removed a lot of the old dried up grease/gear oil on the tag.  It was rusty too and stampings were faint.

    Reapplied several times over the course of a couple of weeks….just playing around.

    Gotta remember to show the grandkids that trick.😁

     

    8/05/2022 2:05 PM  #6

    MS
    Forum Originator

    Offline

    From: Canyon Lake, Texas
    Registered: 1/24/2013
    Posts: 12,248

    Re: COULD this actually work???!

    I am thinking a firecracker in one cylinder of a v8 would not have enough BOOM to move a piston in any v8 engine even if all eight were able to move freely.

    Money you enjoy wasting is NOT wasted money... unless your wife finds out.
     

    8/05/2022 2:40 PM  #7

    Bullet Bob
    Senior 24-7 FYI Addict

    Offline

    From: Montrose, Colorado
    Registered: 4/01/2013
    Posts: 4,885

    Re: COULD this actually work???!

    I scrolled down and watched the Whale Blubber explosion....way more fun.

    "you get what you pay for, good work isn't cheap, and there are NO free lunches...PERIOD!"
     

    8/05/2022 5:21 PM  #8

    6sally6
    Hyper FYIFORD ADDICT

    Offline

    From: Surfside Beach,SC
    Registered: 4/02/2013
    Posts: 6,852

    Re: COULD this actually work???!

    Bullet Bob wrote:

    I scrolled down and watched the Whale Blubber explosion....way more fun.

     

    Obviously before Oregon went totally WOKE!!!!
    Ahhhhh the good old days........
    6s6

    Get busy Liv'in or get busy Die'n....Host of the 2020 Bash at the Beach/The only Bash that got cancelled  )8
       •Thread Starter
     

    8/05/2022 5:24 PM  #9

    HudginJ3
    Senior 24-7 FYI Addict

    Offline

    From: Cedar Hill, TX
    Registered: 4/29/2015
    Posts: 1,249

    Re: COULD this actually work???!

    I might work if you do it this way
    https://www.youtube.com/watch?v=65qrzgbTTcQ

    70, ragtop 351W/416 stroker Edel Performer heads w pro flow 4, Comp roller 35-421-8. T5
     

    8/05/2022 5:42 PM  #10

    Rudi
    Senior 24-7 FYI Addict

    Offline

    From: Stuck in the 50's Welland Ca
    Registered: 4/01/2013
    Posts: 3,974

    Re: COULD this actually work???!

    HudginJ3 wrote:

    I might work if you do it this way
    https://www.youtube.com/watch?v=65qrzgbTTcQ

     
    Remember the movie” Flight of the Phoenix” Jimmy Stewart used the “shot gun starter “

    Good work ain't cheap, Cheap work ain't good!   Simple Man
     

    8/05/2022 7:23 PM  #11

    Greg B
    Senior 24-7 FYI Addict

    Offline

    Registered: 4/01/2013
    Posts: 1,695

    Re: COULD this actually work???!

    Old Lanz tractors were started with a shotgun shell.   But my favorite tractor was the

    Hoyt-Clagwell.   Seemed to be a one off model that had a loose wheel and a mind of its own!

    If multiple things can go wrong, the one that will go wrong will be the one that causes the most damage.
     

    8/11/2022 11:26 AM  #12

    RTM
    Senior 24-7 FYI Addict

    Offline

    From: Cape Coral FL
    Registered: 5/22/2019
    Posts: 1,714

    Re: COULD this actually work???!

    I can’t believe someone thought that would work.  Glad they don’t work on anything I own.

     

     

    1 of 1

  • Index
  •  » FYI Ford, Classic Mustang Tech Discussion
  •  »  COULD this actually work???!

    • Board footera


    REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.