FYI FORD - MustangSteve's Ford Mustang Forum
The Internet's Most Knowledgeable Classic Mustang Information
IF YOU HAVE A QUESTION ABOUT CLASSIC FORD MUSTANGS, YOU HAVE COME TO THE RIGHT PLACE!
MustangSteve has over 30 years of Mustang experience, having owned 30 of them and restored several others. With the help of other Mustangers, this site is dedicated to helping anyone wanting to restore or modify their Mustang.... THERE ARE NO DUMB QUESTIONS!!!!!
Visit MustangSteve's web site to view some of my work and find details for:
FYIFORD Contributors' PICTURES - Power Brake Retrofit Kits for 65-66 Stangs - Classic Mustang FAQ's by MustangSteve - How to wire in a Duraspark Ignition - Mustang Ride Height Pictures and Descriptions - Steel Bushings to fit Granada Spindles to Mustang Tie Rods - Visit my EBAY store MustangSteve Performance - How to Install Granada Disc Brakes MustangSteve's Disc Brake Swap Page - FYIFORD Acronyms for guide to all the acronyms used on this page - FYIFORD Important information and upcoming events

You are not logged in. Would you like to login or register?

11/04/2025 11:31 AM  #1


Added turn downs to my exhaust.

I decided to add some turn downs on the mufflers since I'm not going to route anything over the rear axle.  Turned them at a slight angle in hopes of not inducing any kind of exhaust drone. 


 

11/05/2025 10:47 AM  #2


Re: Added turn downs to my exhaust.

Turn down s really sound 'bad-a$$'....got that 'thump-thump' gong on at idle...got the old NASCAR roar when ya nail it ...
got the runny eyes from fumes when you 'roll with the windows down'...(and nose)... the useless sound system ( unless the volume is WAAAYYY up)....the good old 'ringing ears' after a couple hours on the highway...the high pitched whine..."coming from the passenger seat"...
Is it worth it....SURE if ya just drive it to local shows and around town.
THAT SWEEET SOUND (AND FUMES) WILL BOUNCE OFF THE ROAD AND BACK INTO THE CAR (even with all the sound dampening you bought.
Strange coming from 6Sally6 I know.
The answer... exhaust dumps to open when ya wanna make sweet noise...the rest of the time...pipes to the REAR of the Mustang will make it more fun
6sally6


Get busy Liv'in or get busy Die'n....Host of the 2020 Bash at the Beach/The only Bash that got cancelled  )8
 

11/05/2025 11:45 AM  #3


Re: Added turn downs to my exhaust.

yeah sounds good but the fumes are terrible .


Its really me....I fixed my caps lock .
 

11/05/2025 3:54 PM  #4


Re: Added turn downs to my exhaust.

I used to have those on my car… when I was in high school


Money you enjoy wasting is NOT wasted money... unless your wife finds out.
 

11/06/2025 8:20 AM  #5


Re: Added turn downs to my exhaust.

A friend had these as other posts identified, the smells and the noise didn't make for a pleasant driving experience.
And the heat going to the rear tires helps them age faster.  
Good thing is, it can be changed if it is an issue. 


65 Fastback, 351W, 5-speed, 4 wheel discs, 9" rear,  R&C Front End.
 

11/06/2025 4:37 PM  #6


Re: Added turn downs to my exhaust.

Drove it Tuesday night with the windows down.  Wife never complained of fumes.  She would be the first to complain!  I could smell a little but nothing that would make me dislike it.

     Thread Starter
 

11/06/2025 5:14 PM  #7


Re: Added turn downs to my exhaust.

good deal ...Drive on Brother
'Hit-Do' make'm sound good
6sally6


Get busy Liv'in or get busy Die'n....Host of the 2020 Bash at the Beach/The only Bash that got cancelled  )8
 

11/07/2025 6:23 AM  #8


Re: Added turn downs to my exhaust.

Wife is OK, yep, you're good to go!


65 Fastback, 351W, 5-speed, 4 wheel discs, 9" rear,  R&C Front End.
 

11/07/2025 10:52 PM  #9


Re: Added turn downs to my exhaust.

 Does anyone remember "Cherry Bombs" mufflers (?) 


68 coupe - 351W, 4R70W, 9" 3.25 -- 65 convertible - 289 4v, C4, 8" 3.00
 

11/08/2025 5:56 AM  #10


Re: Added turn downs to my exhaust.

Ron68 wrote:

 Does anyone remember "Cherry Bombs" mufflers (?) 

Yes I do ... and one can still buy them today! 
 


65 Fastback, 351W, 5-speed, 4 wheel discs, 9" rear,  R&C Front End.
 

11/08/2025 7:29 AM  #11


Re: Added turn downs to my exhaust.

Yep, pretty sure that's whats on my '76 CJ5.  

 

11/08/2025 12:42 PM  #12


Re: Added turn downs to my exhaust.

I had cheery bombs on a /970 fastback I built that had a 460 four bolt main block, ported SCT heads by a shop in GA.  314 duration with .710 lift roller cam and a Barry Grant 1050 dominator carb.  Car wouldn't idle below 1700 rpm and was very loud.  I loved that thing and wish I still had it.  It would shake pictures on the house walls if I was next to it idling.  That's the only car that has scared me.  It would go sideways at 55mph on the highway when I dropped it into 2nd gear and got on it.

     Thread Starter
 

11/09/2025 7:41 AM  #13


Re: Added turn downs to my exhaust.

Around here many car shows are on grass, which means many approaches are worn a bit thin so the turn downs kick up the dust....Perfect!!


"you get what you pay for, good work isn't cheap, and there are NO free lunches...PERIOD!"
 

11/09/2025 8:29 AM  #14


Re: Added turn downs to my exhaust.

Turn downs dumped under the car were always good for clearing Fall leaves off the driveway! 


65 Fastback, 351W, 5-speed, 4 wheel discs, 9" rear,  R&C Front End.
 

11/09/2025 4:22 PM  #15


Re: Added turn downs to my exhaust.

RTM wrote:

I had cheery bombs on a /970 fastback I built that had a 460 four bolt main block, ported SCT heads by a shop in GA. 314 duration with .710 lift roller cam and a Barry Grant 1050 dominator carb. Car wouldn't idle below 1700 rpm and was very loud. I loved that thing and wish I still had it. It would shake pictures on the house walls if I was next to it idling. That's the only car that has scared me. It would go sideways at 55mph on the highway when I dropped it into 2nd gear and got on it.

Sounds like the Vette my uncle had when I was a kid.  '67 L88 with an M22 and a 4.10 rear.  It didn't have an accelerator; it had a tire spin pedal.  Ran high 10s at the Corvette Nationals one year with nothing more than a pair of 8" wide slicks.  Yeah, yeah, I know, but I come from a Chevy family.  Dad did own a couple Fords over the years and some other makes too, but it was mostly Chevy trucks, Vetttes, Chevelles, Camaros, and Elcos in my childhood.  
 

 

Board footera


REMEMBER!!! When posting a question about your Mustang or other Ford on this forum, BE SURE to tell us what it is, what year, engine, etc so we have enough information to go on.