Replaced my front seats with a pair out of a 2015 Mustang, everything went fine, but the steering wheel is too big and off set too much.  I like the stock steering  wheel, but at 16 inch diameter with a 5 inch offset it's just not going to work, what size and brand have you guys replaced the stock wheel with, I've seen 14 - 15 inch dia and 3 inch to 0 inch offset, what works good and looks good

Had trouble with the flare fitting leaking on my under dash ac unit, only flare fitting left on the car was on  the low side of the evaporator, found some cone shaped washers on ebay put 1 on, and it fixed the problem.

I have a beautiful set of 2013 Roush electric seats to put in my 65 coupe, anything in particular I need to know and what about the wiring for the driver's side, also will the rear seats fit and how big of issue are they to install

I have a 64 1/2 coupe with a stock 289 with ac and an electric cooling fan, I would like to have a real sending unit for the fan instead of the tube that goes in the upper radiator hose, is there another way other than having the radiator fitted for a sending unit, like maybe a t -stat housing off a 390, it looks like a sensor would go right in it

Is it common when putting a bigger swaybar on the front of a 65 coupe with a 289 and 1 inch lowered springs to have to trim the front rails for clearance?  The rails look like they were trimed for the stock swaybar, the new bar is a 1inch bar and it's going to need more clearance is this normal?